My KB 02 GT has a 160o thermostat that came with the supercharger. The coolant gauge needle typically sits in the 2nd quarter region of the face but I find it tends to spend more time nearer the middle of the gauge face than I would expect given its lower rating.
Where does your gauge sit and how stable is it there?
I have no concerns about cooling fans not coming on, no coolant level problems etc. But with the blower, I would much prefer the engine to run a bit cooler as KB intended.
I'm thinking I might replace the thermostat as a preventive measure regardless but am curious to know if others see their temp gauge moving some and whether they see mid-scale readings or not.
EDIT: Just checked the KB web site and see that KB sells a 180o thermostat for the 4.6 because "160 degrees can create problems in these engines". Interesting. Maybe things are actually okay since this is only 15 degrees lower than the 195 OE thermostat. Still, I'm curious to know where other KB guys running a KB-supplied thermostats see their temp gauges.
Where does your gauge sit and how stable is it there?
I have no concerns about cooling fans not coming on, no coolant level problems etc. But with the blower, I would much prefer the engine to run a bit cooler as KB intended.
I'm thinking I might replace the thermostat as a preventive measure regardless but am curious to know if others see their temp gauge moving some and whether they see mid-scale readings or not.
EDIT: Just checked the KB web site and see that KB sells a 180o thermostat for the 4.6 because "160 degrees can create problems in these engines". Interesting. Maybe things are actually okay since this is only 15 degrees lower than the 195 OE thermostat. Still, I'm curious to know where other KB guys running a KB-supplied thermostats see their temp gauges.