18''x10,5'' will fit?

RAD · Apr 27, 2007

I am about to get some rims , will 18x10,5 fit on the rear? If so what is involved? Car is daily driven. Thanks.

CMEFLY · Apr 27, 2007

I have 17x10.5 on the rear with 315-40-17. The only thing i did was flip my quad shocks for a little more room. they should fit .

95CobraMike · Apr 28, 2007

yeah i got some... i think it has alot to do with the back spacing.. you might want to check on that. it also depends on your tire selection. you might rub on your exhaust 315's fit, but again, it depends on your back space.

i dont know what the back space number is, but maybe someone else will know

RAD · Apr 28, 2007

thanks guys

Kpmonti · Apr 28, 2007

I'm also intending on buying some 18x10.5 cobras for the rear of mine. Let me know how it works out for you,and what size tire works.

RAD · May 4, 2007

wheels should be in tuesday but have few more questions: can I run them wheels on stock springs for like two weeks ? they are not too soft?

RAD · May 14, 2007

Hey guys how to flip the quad shock? how hard it is to do ? does it affect "cornering" :lol:

?

CMEFLY · May 14, 2007

just unbolt them and turn them around. they help with wheel hop. flipping them just gives your tires a little bit more room.some people remove them with no problems,i would just turn them around. stock springs are ok to use.

RAD · May 15, 2007

CMEFLY said:
just unbolt them and turn them around. they help with wheel hop. flipping them just gives your tires a little bit more room.some people remove them with no problems,i would just turn them around. stock springs are ok to use.

thanks a lot

Venom351R · May 15, 2007

Mine has 17X10.5 on the back with Nitto 315's and they fit good.

miller92063 · May 16, 2007

I have 18x10.5 with 305/35 nitto drag radials. I have no quad shock, no difference without it.
I did have minor rubbing on the inside of the tire, but the piece it was rubbing on could be bent, or cut out of the way.
I believe my spacing was 24mm, but not possitive.