Need some help. Correct forum? Gentleman died of throat cancer and left this mostly restored gem. Everything on it is new from brakes to door handles to dash pad....my problem? Engine is C9OE-6015-C (1969-302), with 65 289 heads on it. Can't figure that one out. He had owned the car since late 80's? Car has zero oil pressure and not sure what to do. Was told engine was just built, shows all new gaskets on pan areas. Starts, doesn't rattle but oil light stays on. Shut her down and removed valve covers, no oil reaching rockers as drill spins oil pump shaft very fast in correct direction. Removed oil pressure sending unit and repeated experiment, not one drop of the full crankcase oil exits the sending unit hole. Did someone forget to put the oil strainer on the pump? The galley plugs? I'm at a loss on what should be my next step on the classic Mustang. Any suggestions from this forum would be greatly appreciated. Tks in advance.