Anybody ever install from scratch the Quarter, Side and Rear windows on a 1967 Coupe before and if so, how did you go about adjusting them to properly fit the new seals?
I have never done this before and definitely can't remember how I originally took them out as it was years ago. I found a few gouges, one of which was from Mustang Monthly, but it really doesn't get into specifics of how they should be adjusted and in which order.
Any ideas or help anybody can give me would be apreciated. I wasted a few hours mickey mousing with it yesterday and it obviously is still not right.
Thanks in advance.
I have never done this before and definitely can't remember how I originally took them out as it was years ago. I found a few gouges, one of which was from Mustang Monthly, but it really doesn't get into specifics of how they should be adjusted and in which order.
Any ideas or help anybody can give me would be apreciated. I wasted a few hours mickey mousing with it yesterday and it obviously is still not right.
Thanks in advance.