1969 Mach 1 hood scoop 2005

horse sence · Sep 25, 2023

So my brother wants a 69 mach 1 scoop on his 2005 GT ,along with a black out hood just like the 69 with a blue boarder . I took an old junk hood and fit a 69 scoop to it ,i still need to grind the arch just a bit to fit up to the 2005 hood but looks like it will fit very nice . The turn signals will also be hooked up in the mach 1 scoop .
I transferred the pattern to a black hood i have here with a bit of damage at the peak . I am pretty sure i can straighten this hood so he can save his original hood .

horse sence · Sep 25, 2023

Had to cut two openings in the back of the hood for the lights and drill all the mounting holes ,two of the holes actually hit where the 05 scoop would bolt down

horse sence · Sep 26, 2023

Yeah,this hood is easily savable. I have a bit of knocking around to do on the front lip but aluminum is way easier to work than steel

horse sence · Sep 26, 2023

Re arched the hood scoop ,its a tight fit to the hood all the way around .

horse sence · Sep 26, 2023

Bolt up is nice and clean ,i needed to drill holes to access the studs and nuts

horse sence · Sep 27, 2023

Nice ,i got the peak of the hood out to just a couple of tiny dings ,if i had a way to get behind them i could push them out as well . I am happy with this though .

horse sence · Sep 27, 2023

I bought a couple of sleeves of sand paper last week ,80 grit and 150 grit , i took out the first sheet of 80 and used it up and went for another sheet , what the hell! It was used ! I didnt think much about it and went on with 150 grit ,first sheet used up i got another one ...you guessed it ,it was used also ! Some jack ass used 1 sheet out of both sleeves ,put it back and must have returned the paper haha ! There is some real tight wads out there !

horse sence · Sep 27, 2023

Time to sand the hood top and bottom and the scoop too ,give them a good shot of primer ,let that sit a couple of days and block sand . Glad i didnt toss this hood.

horse sence · Sep 28, 2023

Fit the hood to the car ,yep its dirty ,only 1000 in the last 5 years hes owned it . The hood fits good ,good thing because there is no adjustment ,you simply bolt it down .
Mounted the hood pin plates as well ,didnt want to drill holes after painting .

horse sence · Sep 28, 2023

Now he is thinking about a 69 mach 1 style rear wing ,the hood will get painted just as soon as i get a little time .

horse sence · Sep 30, 2023

Gave it a good block sanding with 180 grit ,just knocked the top of so it could breath . Some time next week it will get paint .

horse sence · Oct 4, 2023

Tomorrow we get some color !

horse sence · Oct 5, 2023

The blue is on ,in about 45 minutes the first coat of clear

horse sence · Oct 5, 2023

Clear is on ,hopefully the black tomorrow ,i used medium catalyst so it may take another day to cure

horse sence · Oct 6, 2023

The black is on but it will be a while before clear coat . You can just barely make out the fine line tape around the edge ,once the tape is pulled there will be a blue boarder with a 1/8 th line

horse sence · Oct 6, 2023

Pulled the tape ,a bit of sanding tomorrow and a good buffing and bolt it on !

horse sence · Oct 7, 2023

Sanded and buffed ,get the hood scoop put together tomorrow and we can bolt it on .
I should have bought one of these mini buffers a long time ago ,a spot to small for the big buffer or just to delicate and this thing gets right in there ,pretty good for coming from harbor Freight !

horse sence · Oct 7, 2023

The turn signal lights are mounted in the scoop ,they will be functional . Also mounted the scoop grill.
The wires for the scoop is mounted in the hood along with the windshield washer squirters and the hood pin plates on the front of the hood ,the scoop can be mounted tomorrow and the hood bolted on the car ,this is going to look cool !

horse sence · Oct 7, 2023

Looks like i will be busy in the morning so i bolted the scoop on tonight . I think it needs to be a bit more shinny ,what do you think?

horse sence · Oct 8, 2023

Bolted on the hood this morning ,you can see the turn signal lights in the scoop from inside easily .
Give it a good bath tonight because its to hot already now

1969 Mach 1 hood scoop 2005

Similar threads

Privacy & Transparency

Privacy & Transparency