One more check mark towards getting the thing off of the jack stands..
The mount is made.
The trans is wired, the shifter cable is hooked up again.
the old pass-thru in the firewall is plated, and the heater hose is tight.
( Now I gotta make a new hole somewhere else for those wires to come back through.)
The cold side is complete, currently waiting on stuff from Summit to allow me to finish it all up ( There’s a box from them on the front porch as I write this)
That box has a silicone 90, and 3 t-bolt clamps.
this is the new and improved charge tube, now sporting the v-band...
much better.
Tomorrow, I’ll put the exhaust back in place, and try to get the down pipe completed. If I can do that, I’ll paint that bitch, and while the paint is drying,...install the trans lines and the dipstick tube.
Im thinking this monster is too monstrous for me.
* fcking photobucket..now they’re putting a watermark on the pictures,....just wait till tomorrow when I email that ass...