• Mustang Forums
  • 1974 - 1978 Mustang II Talk & Tech

Engine 1979 FORD 302 & 2150 Question, wont start when hot

  • Thread starter Thread starter Gz1996
  • Start date Start date Nov 8, 2018
  • Tags Tags
    carburetor ford 302 wont start warm
G

Gz1996

New Member
Nov 8, 2018
1
0
1
North Bergen, NJ
Nov 8, 2018
#1
  • Nov 8, 2018
  • #1
Hello everyone,
New to this website here. Owner of 79 Thunderbird with Ford 302 and 2150 carb. No place to ask a question, and I know thunderbird and mustang shared the same engine. So, im here.
Here is my problem.
Original everything, Motor craft 2150 carb. The carb is reman installed week ago, fuel hose, couple other hose replaced as well. The problem is, The car will crank but will not start. The problem cause twice till now, both of them happened after I drove for a while, and all after a really rough idle, jump from 200-500rpm,. And the engine dies, and wont start after that. Last time this happened, I waited about 2-3 hours after the vehicle completely cold, then I am able to fire it up. Checked the fuel, I can see fuel been pumped into the engine when I push the throttle pedal(pump). Didn't check sparks, will do if next time this happened. Didn't check alternator. Battery is ok, starter is ok, Cranking is strong, but just wont start.

Just happened again, and after let it cold down for 15 mins, tried to start it, after cranking for 15 seconds, it start but really rough idle, after give it some throttle it runs normal.
 

jozsefsz

15 Year Member
Aug 11, 2013
1,243
332
124
Cleveland OH Area
Nov 9, 2018
#2
  • Nov 9, 2018
  • #2
You likely have an electric choke which is letting the car run ok when you start it cold. Sounds to me that your idle mixture may need some adjustment.

Odd that it won't start if you're getting fuel squirting out of the accelerator pump. I agree you'll want to make sure you're getting good spark, your timing is set properly, and that your vacuum advance is working properly. Check your spark plugs as well to make sure they haven't gotten fouled.

On those old engines, the warm-start procedure is to hold the accelerator down maybe 1/3 of the way while cranking. If you think you may have flooded it (too much fuel) then wide-open-throttle and try cranking.
 
T

ttbit

Founding Member
Oct 26, 2001
155
4
18
Maryville, TN
Nov 14, 2018
#3
  • Nov 14, 2018
  • #3
Check some stupid things like the coil or coil connector. Mine did some strange intermittent stuff and it ended up being the connector on the coil. Tap it lightly when the car is running and see if it makes a difference. Just a thought!
 
You must log in or register to reply here.

Similar threads

Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
976
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
149
1996 - 2004 SN95 Mustang -General/Talk- May 29, 2026
Mhaley2006
M
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
117
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
T
Help with a 95 5L crank no start
  • TheBubbaJoe
  • Nov 4, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
447
1994 - 1995 Specific Tech Nov 5, 2025
AeroCoupe
L
Engine Why won't the motor start if I have spark and fuel
  • LeviAnderson
  • Nov 20, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
420
Fox 5.0 Mustang Tech Nov 20, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1974 - 1978 Mustang II Talk & Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?