1989 Lx Convertible Top Replacement

BlackFoxVert89

Member

May 5, 2014

7

4

13

May 27, 2014

#1

• May 27, 2014

• #1

I bought an 89' lx convertible about 5 months ago and it is going to need a top soon. Being it is my first convertible I have a few questions about the top replacement. The current top now is black vinyl with a plastic rear window. This is probably what I will go back with as well.
My first question is what does a typical top and replacement at a shop cost? I have heard several stories of the top replacement being hard so I'm going to leave it to someone more experienced than me.
Next, what advice can you experienced convertible owners give me for caring for the top so that it will last?

 

89oem

Mustang Master

Dec 18, 2013

1,456

542

144

May 27, 2014

#2

• May 27, 2014

• #2

a good quality shop replacement with glass and the 89 stock liner pads is 1,000 to 1,200.

there are folks that do it themselves,

lmr has a number of kits and manuals as well

http://www.latemodelrestoration.com/item/ET-CTK1-BLK/1983-90-Mustang-Black-Convertible-Top-Kit

maint:
just wash it by hand with the car, be sure you pull the folds out that are against the pivot hinges when / as you lower it... theyve been known to catch and tear

 

Reactions: Jarrod@latemodel

Jarrod@latemodel

Late Model Restoration

Nov 29, 1999

606

47

39

Tx

May 27, 2014

#3

• May 27, 2014

• #3

And if you see a different color top that you want, we have them listed as well. For the most part, we can put any "kit" together that you want.

http://www.latemodelrestoration.com/products/83-93-Mustang-Convertible-Tops

 

aar0s

Founding Member

Dec 20, 1998

1,015

55

69

May 27, 2014

#4

• May 27, 2014

• #4

I've had a vert for about fifteen years now and the best thing I can tell ya is to spring for a glass rear window. Every plastic window I've seen hazes over and cracks. Remember it's the same work to install a junk top as it is to install a quality top. Keep it clean, don't put it down wet or when it's below about 65. Also, the sun is murder on a top, uv flat kills the vinyl so when possible keep it in the shade.

 

mikestang63

SN Certified Technician

Aug 27, 2012

11,606

8,859

214

In the garage

May 27, 2014

#5

• May 27, 2014

• #5

All good advice. You want a quality top like Robbins or EZ On. Get a glass back and also get new pads. Just as important is the install, you can easily mess up a good top with the improper install.

For care, do not use any armor all or similar product. There is a product called Ragg Top that works well. Use a mild soap with a good brush to keep it clean.

 

BlackFoxVert89

Member

May 5, 2014

7

4

13

May 28, 2014

#6

• May 28, 2014

• #6

Thanks for all the info guys. I'll look into a glass back since that seems to be the way to go.
Have any of you guys tried installing it yourself? I've heard you need a nice staple gun and industrial adhesive to install it correctly.

 

89oem

Mustang Master

Dec 18, 2013

1,456

542

144

May 28, 2014

#7

• May 28, 2014

• #7

glass :thumbsup:

it needs to be right, i just pay a good shop and know i wont have to worry about alignment, wrinkles etc
but i know some folks have good success diy...

on another note, mike referring to robbins made me learn there is a tsb about how to fix the top tearing issue... gotta track that down...