I rented one from O’Reilly. The middle bolt is tight as hell n can’t take it off. The crank turns as I try to take the bolt off. I used a pipe wrench to try to grab it but that didn’t work. I was avoiding to take the radiator off but looks like that’s going to be the option. Can I use an impact gun to remove the enter bolt? I have one from Harbor Freight that has forward n Reverse only.You need a puller.
Something like this: https://www.amazon.com/Professional...le-Mitsubishi/dp/B08FD1FQSC/ref=sr_1_5?sr=8-5
You local parts store may have one for loan, rent, and/or sale.
AbsolutelyCan I use an impact gun to remove the enter bolt?
I did that once when I was very young, I'm still traumatised by that incidentYou can do the ol' socket with a long breaker bar against the frame then bump the starter. Did this ALOT back on the day when I didn't have power tools.
You can't do that, it's not an emergencyPut the car in gear and set the emergency brake....
thank you, thank you very much, God Bless!!
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?