• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

1996-2004 Mustang 2" Drop Spindles Any Good?

  • Thread starter Thread starter AftrBurNr
  • Start date Start date Oct 11, 2007
A

AftrBurNr

New Member
Oct 8, 2007
9
0
0
Oct 11, 2007
#1
  • Oct 11, 2007
  • #1
I searched all over this site and everyone talks about drop springs..

I had tons of cars with sport springs and it always makes them ride like crap. I live in brooklyn and the pavement is no joke around here, u might as well be off-roading.

I found these drop spindles that dont mess with the geometry of your suspention, they just move the mounting point for the spindle higher up therefore lowering the car and supposedly giving u the same ride quality

Check them out here: http://www.racecraft.com/products.php?cat=10

If anyone has used these please let me know how u like them and if there is tire rubbing etc.. also post pics!

also.. 2" drop seems like alot to me, if anyone has pics of there car dropped 2" with srpings please post em
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Oct 12, 2007
#2
  • Oct 12, 2007
  • #2
That is a lot of money, just buy a set of H and R's I have never used them, but everybody wanting really low Mustangs gets H and R's recommendation.
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Oct 12, 2007
#3
  • Oct 12, 2007
  • #3
Drop spindles are cool, but are silly on a street car; especially when you're talking about a 2" drop for that much cash (still gotta do the rear end, what would you do??).
 
A

AftrBurNr

New Member
Oct 8, 2007
9
0
0
Oct 13, 2007
#4
  • Oct 13, 2007
  • #4
what does being a street car have to do with it? in the classic car market thats all they use these days cause its so simple and easy and u cant go wrong.. I wouldnt mind stiff lowering springs for the rear, i just wish the kit had a 1" option cause then id lower the front with those and leave the rear stock.. i was thinking 2" might be too much. is it?
 

blacksheep-1

Member
Oct 21, 2006
322
4
18
Oct 13, 2007
#5
  • Oct 13, 2007
  • #5
IMO the drop spindles are the way to go, if the spindles are made correctly you will not need the bump steer kit, or the special ball joints to get the alignment back where it needs to be or any of the other associated BS that almost adds up to the price of the dropped spindles to begin with, and, the ride stays decent.
As an example:
A set of lowering springs (steeda) 1/2 of $229 = $115.00
The trick ball joint that fixes the screwed up roll
center from the lowering springs (steeda) $129.00
Bumpsteer kit (steeda)to fix what the springs
screwed up $ 149.00
_______
Grand total of $393.00

Trick spindles = $495.00, you save only $100 bucks
 

Superhereaux

chicks make me feel inadequate
Founding Member
Jul 30, 2002
538
3
59
South Texas
Oct 13, 2007
#6
  • Oct 13, 2007
  • #6
i thought about buying those exact spindles awhile back for the same reasons you want them, suspension geometry and ride comfort


sounded like a good idea at the time, then my brain slowly started working

a.) 2" is quite a bit for a Mustang, it doesn't sound like much but it is. i don't like the look of "slammed" Mustangs (imo, of course)

2.) where are you going to find just rear lowering spring? you can't cut the stock ones, the ride would be terrible and you'll blow the shocks in a month. you can't leave the rear as is either. 2 inches of fender gap up front and 6 inches out back would just look goofy

d.) with those spindles and a stock front suspension, you get just that, a stock (i.e. crap) front suspension. the stock springs aren't the greatest and you still have struts that'll fail in 50,000 miles
 
T

thomas91169

I'd donkey punch my sister.
Aug 19, 2005
0
0
0
Modesto, CA
Oct 14, 2007
#7
  • Oct 14, 2007
  • #7
just get the standard spring/shock combo like everyone else. Ride quality is directly related to the combo, if you get 20$ ebay coilovers or cheapo springs you have a ****ty ride, if you spend the money on the right combo, you get a great ride.
 
You must log in or register to reply here.

Similar threads

SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
817
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
F
Low fuel pressure downstream of fuel rail, good pressure upstream
  • FYWW
  • Feb 29, 2024
  • SN95 4.6L Mustang Tech
Replies
5
Views
2K
SN95 4.6L Mustang Tech May 9, 2026
Cartel
A
Resolved HELP: P0174 2004 Mach 1
  • alwayshi
  • May 26, 2023
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
24
Views
4K
1996 - 2004 SN95 Mustang -General/Talk- Jan 9, 2024
alwayshi
A
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?