• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

2 Quarts of Oil?

  • Thread starter Thread starter 00GTpony
  • Start date Start date Jun 22, 2007
Prev
  • 1
  • 2
First Prev 2 of 2

Dusstbuster

I love meat more than anything! I just have a spec
May 31, 2004
1,462
33
64
Moorhead, Minnesota
Jun 24, 2007
#21
  • Jun 24, 2007
  • #21
Was your car level when you checked it. If your driveway is slanted that could give you a misleading oil level too being as the oil would be at the back edge of the oil pan.
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 24, 2007
#22
  • Jun 24, 2007
  • #22
I still think he now has 7 quarts in the crankcase since he said he added two...
 

the98stang

Active Member
Aug 12, 2005
2,408
0
47
Clovis, CA
Jun 24, 2007
#23
  • Jun 24, 2007
  • #23
Kilgore Trout said:
I still think he now has 7 quarts in the crankcase since he said he added two...
Click to expand...

The dipstick is accurate....I don't know why you think that.

It's not that hard to check your damn oil people!
 

topless98gt

Adhesive Feces
Mar 31, 2005
182
0
17
Arlington, TX
Jun 24, 2007
#24
  • Jun 24, 2007
  • #24
Kilgore Trout said:
I still think he now has 7 quarts in the crankcase since he said he added two...
Click to expand...
Unless he was low, he may now have 8 quarts according to you...later model GTs take 6 quarts.

the98stang said:
The dipstick is accurate....I don't know why you think that.

It's not that hard to check your damn oil people!
Click to expand...
+1, unless it's on a hill. Or if it is running
 
D

Dragstr05

New Member
Dec 21, 2004
643
1
0
Stafford VA
Jun 24, 2007
#25
  • Jun 24, 2007
  • #25
First, if you lost 2 quarts in 300 miles, you would know about it for sure. You would see it smoking, or leaking somewhere. Thats alot of oil to lose in only 300 miles. Its possible for a gasket to leak 2 quarts that quickly, but if thats the case I doubt it just started right after your oil change.

Check your drain plug, and try to remember if the gasket came off with the old filter. Sometimes they stick to the block, and a double-gasket oil filter WILL leak.

The other scenario is you didnt add enough oil, or it wasnt check properly. If you check your oil WITHOUT first starting the car, you get a false reading since the oil filter has not yet been filled. If you check the car with it running, you will get a false reading. Remove, wipe, then check. This gives you a clean, reliable reading also provided you are parked on a flat surface.
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
Jun 24, 2007
#26
  • Jun 24, 2007
  • #26
the98stang said:
Ummm no....oil doesn't just burn away for no apparent reason. :Zip2:
Click to expand...

thats why i asked how long its been. losing oil after 300 miles; problem.

losing oil after 7000 miles; 7 year old/high mileage car with old gaskets and seals.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Jun 25, 2007
#27
  • Jun 25, 2007
  • #27
46gtsblown said:
I don't taste my oil but I do rub it between my fingers and smell it.

Dwayne
Click to expand...

I rub it all over my chest while looking a mirror
 

mustang462002

New Member
Mar 13, 2007
89
0
0
Jun 25, 2007
#28
  • Jun 25, 2007
  • #28
svttech76 said:
I rub it all over my chest while looking a mirror
Click to expand...

Hahaha me too.
 

larrendeuce

Member
Sep 13, 2003
649
1
19
Southern NJ
Jun 25, 2007
#29
  • Jun 25, 2007
  • #29
There are any number of things that may have occured. A legit problem with the engine causing it to consume oil or leak oil for one; two error during the oil change.

-How long did you wait after running the car to check the oil. You might only have a drip or two at the end of the dipstick if you checked it right after driving
-How many Quarts were added during the oil change?
-Did you add oil to the filter before installing it?
-Was the oil added during the change until a desired dipstick reading was met or a specific amount of oil added?
-Drain Plug torqued to spec?
-notice any oil wetness or drips from under the car? Any stains on the pavement where you park?
 

larrendeuce

Member
Sep 13, 2003
649
1
19
Southern NJ
Jun 25, 2007
#30
  • Jun 25, 2007
  • #30
svttech76 said:
I rub it all over my chest while looking a mirror
Click to expand...

I prefer a little gear oil behind the ears.
 

larrendeuce

Member
Sep 13, 2003
649
1
19
Southern NJ
Jun 25, 2007
#31
  • Jun 25, 2007
  • #31
duplicate
 

00GTpony

Member
Mar 10, 2007
162
0
16
Jun 26, 2007
#32
  • Jun 26, 2007
  • #32
i honestly dont remember how much oil i put in on the last oil change... Im sure i did it till i got the desired spot on the dipstick..... Yes it was on a flat surface... im pretty sure it isnt leaking, i park my car in the same spot every night, and theres no oil there...... also , no there has never been smoke comming out of motor or exhaust
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
Jun 26, 2007
#33
  • Jun 26, 2007
  • #33
00GTpony said:
i honestly dont remember how much oil i put in on the last oil change... Im sure i did it till i got the desired spot on the dipstick..... Yes it was on a flat surface... im pretty sure it isnt leaking, i park my car in the same spot every night, and theres no oil there...... also , no there has never been smoke comming out of motor or exhaust
Click to expand...

Get your manual out and find the correct amount to be used in your car. Mine is 6 but later models went to 5. Only then can you be assured of getting what is needed and not putting in too much or not enough.
 

larrendeuce

Member
Sep 13, 2003
649
1
19
Southern NJ
Jun 26, 2007
#34
  • Jun 26, 2007
  • #34
There is a possibility that by adding oil until the dipstick read full, the engine was still low on oil. The oil filter holds a decent amount, not 2 quarts usually but if it was dry it can give you a low reading. Adding more to get the dipstick to read full after 300 miles is probably fine but in the future add the specified amount of oil to the engine, if you don't put any in the oil filter and don't start it up you might have a high reading on the dipstick. However after running the engine and allowing the oil to return to the pan you should have a normal full reading.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
469
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
734
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
J
'04 3.8L V6 mineral deposits and oil on #3 cylinder. Does it need a rebuild or something simpler?
  • joeybuddy96
  • Mar 18, 2026
  • SN95 V6 Mustang Tech
Replies
7
Views
298
SN95 V6 Mustang Tech Jul 24, 2026
gkomo
Engine 87 NA - Tune or no Tune needed?
  • R82148V
  • Sep 17, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
379
Fox 5.0 Mustang Tech Sep 17, 2025
R82148V
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
312
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?