2 questions about my foglights on my 92 vert

W

webshot

Member

Sep 11, 2005

738

0

17

Yay Area, California

Nov 10, 2005

#1

• Nov 10, 2005

• #1

For some reason when I turn on my fog lights.....after about 10 minutes. My headlights and fog lights cutoff. To get my headlights back on I have to turn off both then turn back on my headlights to get them back on. Any idea why this happens?

Also is there a way to get my fog lights to turn on independantly of my headlights? Anyone else done this?

 

8

89stangWhiz

Member

Sep 28, 2005

104

0

16

Mechanicsville, MD

Nov 10, 2005

#2

• Nov 10, 2005

• #2

the wiring or connector is faulty, and its a common problem that the fog lights cut out the headlights. If you just dont run the fog lights, everything should be fine.
I was actually wondering myself if there was a fix, one time I heard if you used better wire to the fog lights? I am not sure.
Yes, you could make the fog lights be independant, but that would require you redoing how they are connected. They are made to work only with low beams. They are as names, to see through the fog. Theoretically Ford says you should only be using them to see 'under' then fog with. They also do not work with your high beams, as you should not be using high beams in the foghttp://forums.stangnet.com/images/smilies/thumb.gif

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Nov 10, 2005

#3

• Nov 10, 2005

• #3

SEE http://www.corral.net/tech/maintenance/foglights.html to fix the problem. The stock wiring isn't up to the job and is overheating. The headlight switch & turn/multifunction switch are affected by Ford's wiring problem. Sometimes it overheats so badly that the plastic shells of the wiring connectors start to melt.

 

W

webshot

Member

Sep 11, 2005

738

0

17

Yay Area, California

Nov 10, 2005

#4

• Nov 10, 2005

• #4

thanks jrichker.....man you are always there to save my buns with some good info.....(and its appreciated)


89stang thanks as well...

 

T

THC420

Banned

Dec 18, 2001

202

0

0

Ontario, Canada

Nov 10, 2005

#5

• Nov 10, 2005

• #5

at least your lights just turn off temporarily. mine melted the whole ****in foglight/headlight switch, this was before I knew of this problem. Id do the corral fix now before its too late. Its much easier to do without haveing to pick through burned wires. trust me on this one.

 

bubba-dough

Active Member

Dec 28, 2004

1,044

2

38

Indiana

Nov 10, 2005

#6

• Nov 10, 2005

• #6

When you get in there to do the relay fix, you may find that you will need to replace the wire and harnessess as well. Its not a hard job at all and the results are well worth it. Goodluck.

 

W

webshot

Member

Sep 11, 2005

738

0

17

Yay Area, California

Nov 10, 2005

#7

• Nov 10, 2005

• #7

thanks, I think I will make this my weekend project...Maybe install some white face gauges while I am there too....

Thanks for the heads up bubba.

For a second I thought I was trippin when the lights shut-off....glad to know this was something documented.

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Nov 10, 2005

#8

• Nov 10, 2005

• #8

If you find that wires are burned, here is a recent thread with some good info on sourcing new connectors, etc:

http://forums.stangnet.com/showthread.php?t=593730

Good luck.