• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

2001 Gt 4r70w Problem

  • Thread starter Thread starter James Shearer
  • Start date Start date Jul 16, 2015
J

James Shearer

New Member
Jul 15, 2015
2
0
1
Jul 16, 2015
#1
  • Jul 16, 2015
  • #1
I bought my second mustang, a 2001 GT with a 4R70W, the first is a base 3.8 with a 4R70W, so I am familiar with these trannies with high miles. My dilemma is figuring out what is wrong. Here are the symptoms of the GT tranny. I found out a little more about the problem bring it home. We bought the GT knowing the tranny needed to be replaced or so we were told.Its problem stems from a teenager coupled with a GT and an automatic transmission, I am sure you can imagine what was done to this transmission in the hands of a young adult.
Anyway we were towing it home to Death Valley from Pahrump NV, when we were outside of the boundary of the park, I had a bright idea of coasting into the valley, it drops almost 4000 feet in 12 miles by the time you reach Furnace Creek. We got the car ready to coast and I started it since it is easier to break and steer with the engine running. Once the car got rolling at about 10 mph, I figured "what the hell" and put into drive from neutral. Low and behold, the tranny has a little bit of life left in it. I could feel it shift gears, it was faint but it was shifting. When I pressed on the gas pedal it would actually go, I got it up to about 70 but I had to do it gracefully otherwise if I went above 2K RPMS the tranny would slip out of gear. I got all the way through Furnace Creek and was able to get the car over some small hills. Once we got to the big hill to the house I had to pull over and we had to finish towing it to the house.

Does anyone have a good idea is wrong with the tranny, does it need an entire rebuild or would it be something less, such as a the torque convertor or the valve body?

Thanks

JS
 

Puggy_sd455

Active Member
May 10, 2015
136
41
38
Marion Ohio
Jul 21, 2015
#2
  • Jul 21, 2015
  • #2
I'd start by dropping the pan and seeing how many metal shavings are in there. From the sounds of it id bet the clutch packs are cooked and are slipping under load.
 
D

Deleted member 38176

Jul 22, 2015
#3
  • Jul 22, 2015
  • #3
Needs a complete rebuild
 
You must log in or register to reply here.

Similar threads

B
2001 roush stage 3 - sat for 5 years
  • Brando_05
  • Aug 26, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
233
1996 - 2004 SN95 Mustang -General/Talk- Aug 26, 2025
Brando_05
B
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
416
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
S
KNOCK WITH CLUTCH OUT
  • Scwhitten
  • Apr 13, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
233
1996 - 2004 SN95 Mustang -General/Talk- Apr 22, 2025
89ripper
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
441
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?