2012 GT 5.0 Dyno Results

R

ribmaster05

New Member

Apr 19, 2011

12

0

1

Katy, TX

Sep 23, 2011

#1

• Sep 23, 2011

• #1

I took my car to Bumberas Speed Shop and had 3 pulls on their Mustang Dyno.
2012 GT/CS 5.0
GT 500 axleback mufflers
Airaid CAI
3:31 Gears
Bama Tuner running 93-Race for the top 2 pulls
93-Performance tune for the third pull
410 HP max @ 375 ft-lbs torque Race tune
400 HP avg @ 372 ft-lbs
385 HP max @ 354 ft-lbs Performance tune
All pulls in 4th with 7,000 rpm redline rpm.
If you figure 15% for loss in the driveline that would be 472 HP max or 460 average.

I did not get a baseline but considering these numbers on a Mustang Dyno, I am very pleased.

 

Attachments

• Dyno.webp

  24.1 KB · Views: 363

d98gt

Founding Member

Mar 14, 2002

4,505

59

204

SE Texas

Sep 23, 2011

#2

• Sep 23, 2011

• #2

Congrats on hitting the dyno. Any 1/4 mile times for the car yet?

 

R

ribmaster05

New Member

Apr 19, 2011

12

0

1

Katy, TX

Sep 23, 2011

#3

• Sep 23, 2011

• #3

No 1/4 mile times. I am still so new to the whole performance scene that I am building confidence and experience before hitting the 1/4 mile. I did take it to MSR Track in Angleton and had a blast.

 

d98gt

Founding Member

Mar 14, 2002

4,505

59

204

SE Texas

Sep 23, 2011

#4

• Sep 23, 2011

• #4

I can only imagine how much fun that was at MSR.

 

blown1989saleen

Founding Member

Aug 8, 2001

1,397

0

37

oxford,pa

Sep 24, 2011

#5

• Sep 24, 2011

• #5

pretty damn good numbers! what was the a/f looking like? and how was it measured?

 

R

ribmaster05

New Member

Apr 19, 2011

12

0

1

Katy, TX

Sep 24, 2011

#6

• Sep 24, 2011

• #6

The afr is posted at the bottom of the chart which shows 19.3 to 19.4 for the race tune and 19.0 for the performance tune. Measured at the OBDII port.

 

blown1989saleen

Founding Member

Aug 8, 2001

1,397

0

37

oxford,pa

Sep 24, 2011

#7

• Sep 24, 2011

• #7

that a/f is not accurate, you would have hurt the motor had it been actually running that lean. ideal a/f for these motors to make safe reliable power is 12.2-12.5

 

AMChrisYoung

Member

Nov 29, 1999

124

0

16

Malvern, PA

Sep 24, 2011

#8

• Sep 24, 2011

• #8

Those are great numbers, OP!
Thanks for posting them up!

ribmaster05 said:

The afr is posted at the bottom of the chart which shows 19.3 to 19.4 for the race tune and 19.0 for the performance tune. Measured at the OBDII port.

Click to expand...

blown1989saleen said:

that a/f is not accurate, you would have hurt the motor had it been actually running that lean. ideal a/f for these motors to make safe reliable power is 12.2-12.5

Click to expand...

^THIS^^^^^^^^^^^^^^^^^^^^^^

You need to call that shop and ask how accurate that is. I have NEVER seen an AFR that lean and there is no way it can be accurate. If it were, you would have run so lean, MAJOR problems would have occurred on the dyno.


Great numbers, otherwise!

Please PM me about that AFR. If it's accurate, we need to examine your tune immediately!

 

R

ribmaster05

New Member

Apr 19, 2011

12

0

1

Katy, TX

Sep 24, 2011

#9

• Sep 24, 2011

• #9

I will investigate and post what I find

 

AMChrisYoung

Member

Nov 29, 1999

124

0

16

Malvern, PA

Oct 5, 2011

#10

• Oct 5, 2011

• #10

Yea, those numbers look great!


I'm glad to hear that the AFR you posted was not accurate, I was very if it was!


Next time, you might notice more gains if you run in 5th gear, instead of 4th, but otherwise it looks great!

I would try and get back on the dyno to datalog the car, just to confirm everything is in tip-top shape!

Thanks again for getting back to me about the AFR!

 

StreetsideStig

Active Member

Feb 22, 2011

1,012

48

48

Oct 5, 2011

#11

• Oct 5, 2011

• #11

I declare this to be awesome.