24# injectors and MAF Confictions about what people say.

4dStang

Banned

Oct 23, 2002

718

1

0

55

Near St Louis, Missouri

May 17, 2004

#1

• May 17, 2004

• #1

I am upgrading my 95 5.0 to GT-40 heads with cobra intake and 24# injectors. I was told by a guy at a reputable speed shop that I do NOT need to get a new MAF for the change and that I just need to get a new chip burned for the CPU. Can anyone verify the truth about this?


I am getting ready to do the H/C/I in the next month or so and a MAF was one of the last parts I needed. If I don't need the MAF and just a chip, That should be easier and I can keep the stock 5.0 MAF.

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

www.geocities.com

May 17, 2004

#2

• May 17, 2004

• #2

that is tru alot of people sell them if you want to go extreme you can get a PMS. but a dyno shop can burn it for you. But it would be more for the chip than the new MAF.

 

B

blk9450

Founding Member

Jan 31, 2002

1,507

0

0

44

your moms bed

May 17, 2004

#3

• May 17, 2004

• #3

why would you do h/c/i and keep the stock size maf anyway, plus what the hell does the thread title mean?

 

4dStang

Banned

Oct 23, 2002

718

1

0

55

Near St Louis, Missouri

May 17, 2004

#4

• May 17, 2004

• #4

I guess I didn't complete third grade.



I have been told different things by different people, thus CONFLICTIONS. If the 94-95 Cobra uses the same MAF, different computer and I am going to be adding 94-95 cobra parts (24# inj, GT40 heads, cobra intake) to my 95 mustang, do I need a different MAF or can I use the same OEM 95 Mustang MAF with a burned chip or should I get a $250 maf that I may not have needed. Any one else not understand what I am asking? I just want some opinions from people who are more knowledgeable in this area than me.


Thanks friends!

Chris

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

49

PA

www.rnhperformance.com

May 17, 2004

#5

• May 17, 2004

• #5

Yes you can get a new MAF calibrated to the 24# inj or keep your stock meter and have a custom chip burned to calibrate it.

My personally my opinion is the chip will be more expensive, so get a nice 80mm Pro-M for a 24# inj and call it a day. www.pro-flow.com the 80mm were on sale

 

B

blk9450

Founding Member

Jan 31, 2002

1,507

0

0

44

your moms bed

May 17, 2004

#6

• May 17, 2004

• #6

well if what your saying is that the 94-95 gt and cobra use the same maf, why not just get the cobra computer? i heard either the 94-95 gt computer or the cobra computer sucked . if it was the gt computer that sucked, do the swap if it was the cobra computer, disregard this post