3.73 installation cost

[goshia]

okay I have been getting quotes on getting my 3.73 gear and pinon installed and have got 2 quotes. first quote $430.00 second quote $575.00. So what have has it cost others to get the installation done?

 

[COramprat]

Is that parts included? The labor should run about 200...

I paid 595 for gears and bearings labor included.

 

[Kilgore Trout]

I was quoted 8 hours at $85/hour by the Ford dealer for gear install.

 

[goshia]

Just labor.... cost

 

[COramprat]

I was quoted 8 hours at $85/hour by the Ford dealer for gear install.

8 HOURS??? Just replacing gears not rebuilding the car.

 

[Mike97gt]

Is that parts included? The labor should run about 200...

I paid 595 for gears and bearings labor included.

200 is a little on the cheap side depending on where you live.. the only way in my area too get a price like that is if somebody did it on the side..

my shop get 93 bucks a hour and i know i will not touch a rear end job for 2 hours pay.. lol

but on the side i think i would do 250

 

[Mike97gt]

8 HOURS??? Just replacing gears not rebuilding the car.

most shop will quote a day because rear end installs are risky.. major risk of setting it up multiple times too do it right..

plus it's a HUGE risk for the shop.. gear installs will comeback if not done right and the shop then would be paying for gears and if another tech does it the second time labor too.. most buisnesses weight the risk factor into jobs when they quote.. we have too or we will not be in buisness..

sure you can charge exactly what it takes.. but then what happens when you come back and complain about noise in the rear end or some other problem happens..

people think this job is easy and shops make a killing.. you have no idea how much misdiags, parts failures and other stuff costs the shop..

out of that 93 bucks a hour we are lucky if we have a effective labor rate of 45 a hour.. thats after figuring in cost and discounts.. then after that losses and other stuff eats at that too..

fact is the customers want there car fixed NOW and most are not willing too pay big diag charges too diag it right the first time.. so this is what happens.. the labor too install gets inflated too make up for other losses..

 

[BlueRuckus]

$245 for just the install, including kit and fluids in my area.

BTW. This is the QUOTE that I got. Not yet installed.

 

['13_ImpactBlue_GT]

MPH did mine for $350 (fluids, etc.).

 

[01Steeda]

$250 for labor and fluids. done by a shop, not on the side. used gears with 500 miles on them 80 bucks and not a hint of whine.

 

[96BlueStangGT]

I gave 250 at a Ford garage. I wouldn't give no more than 300.

 

[csledd]

I was quoted 8 hours at $85/hour by the Ford dealer for gear install.

geez.. me and my dad installed my gears.. took about 4 hours I think and we're slow as hell lol

 

[SRT Handz]

it costed me 600 for labor and new bearing...thats didnt include the gears

 

[HoustonGT]

okay I have been getting quotes on getting my 3.73 gear and pinon installed and have got 2 quotes. first quote $430.00 second quote $575.00. So what have has it cost others to get the installation done?

Those are very steep. I wouldnt go over 300 including fluids and install kit

 

[blkstangman88]

$460 on labor alone, this was on the "max" the guy quoted me at, just in case they have problems

 

[the98stang]

seems like in CA everything is more expensive...

I got quoted $500 for labor only. When it's all said and done the total cost will be around 8-900 dollars. BUT this is the best bang for the buck...

 

[Stang|ess]

A guy here does it for about $450. That's including frpp gears, and new fluids. So ~$200 for labor.

 

[DocG]

Modular Depot quoted me $250 I think it was for labor.

 

[FORCED2DV8]

200 for labor.. Thats what 2 places quoted me..

 

[BooWFO]

cost varies from place to place. One of the local gear shops here wants 1000 and you bring them the rearend they won't touch it in the car. Some others go as low as 150 for install, I suggest shopping around.