315's....Beat the frame rail in the wheel house. Remove quad shocks, and fox length axles are a must. IF you have SN95 axles they will stick out past the quarter edge. Runs a Nitto tires too...they run small.
I just put a set of Sumitomo's on my 10.5" deep dish bullits. Stock length axles, rear disc with cut stock brackets, no quad shocks, no tailpipes, and no spacers. Used a bfh on the inner wheel well and cut off the fender lip. Sits inside the fender lip and i've got over a 1/2" clearance to the inner fender.