331/347 guys, inside

[xp3nd4bl3]

For those who have 331 or 347 blocks, please post your cam specs, and where the motor makes peak hp. Max numbers, supporting mods, etc. would be great too!.

 

[Pops Fun]

Hi,
347 stroker block and forged internals by http://www.paulsautomotiveengineering.com/ Assembled by Jay (son) Here is the list:

Cold Air Kit
Under Drive Pullies
Flowmaster Exhaust,
Mac Shorty Header
TFS TW Heads
Steeda 19 Cam
Cobra Intake
FMS 65mm T/B
Pro-M 75MM MAF
Steeda 24# injectors
H&S 1.72 Roller Rockers
MSD 6al
Blaster coil
Walbro 255 LPH
Aluminium Flywheel
Timing chain and Gear
High Flow Catted H-Pipe

 

[Nik_95Cobra]

There's more stroker guys @ hardcore50.com Cam grinders, and engine builders and racers alike post there...

 

[xp3nd4bl3]

Very nice Pops! I see the Steeda 19 is a 220/226 on a 115, I'll bet it behaves well on the street.

 

[Pops Fun]

Very nice Pops! I see the Steeda 19 is a 220/226 on a 115, I'll bet it behaves well on the street.

It behaves very well on the street nice idle and some lope.. As you can see it fall off around 5500rpm.

Steve