347 Wet Nos nozzle location

speedtrip · Feb 2, 2012

I have new 80 mm accufab tb and blank egr spacer for my 87. Id like to drill and tap the blank egr space for wet nos nozzle. Didnt think it would be a problem my last kit was a nitrous works plate it sprayed after tb. I havent bought a kit yet but see zex says before tb. Has anyone installed nozzle after tb and does anyone think it will be a problem? Thanks

Rick 91GT · Feb 3, 2012

I would worry about puddling in the intake with a single nozzle wet system. Id put it in the pipe between the maf and tb, making sure it is spraying towards the tb without hitting the pipe wall...this way it will atomize correctly.

srtthis · Feb 3, 2012

how big of a hit you going to throw at it?

speedtrip · Feb 3, 2012

75-150 hp ill tap into my power pipe.

srtthis · Feb 3, 2012

As Rick said go before throttle body... I'd go right at the end of the coupler to get it before the bend

speedtrip · Feb 5, 2012

Heard back from ZEX. " We prefer to have it in front of the throttle body, as to give it proper
atomization and equal distribution through the intake.
Basically yes, it can be done, but we don't recommend it."

srtthis · Feb 6, 2012

if it were me id personally run a plate style set up over a single fogger

speedtrip · Feb 6, 2012

I had good luck with the nitrous works plate system. Im not sure what system im going with. Spending tax returns before they arrive.

347 Wet Nos nozzle location

speedtrip

Member

Rick 91GT

Mustang Master

srtthis

the guy doing it does every local racers rear end

speedtrip

Member

srtthis

the guy doing it does every local racers rear end

speedtrip

Member

srtthis

the guy doing it does every local racers rear end

speedtrip

Member

Similar threads

347 Wet Nos nozzle location

Member

Mustang Master

the guy doing it does every local racers rear end

Member

the guy doing it does every local racers rear end

Member

the guy doing it does every local racers rear end

Member

Similar threads

Privacy & Transparency

Privacy & Transparency