351w swap question

MustangGlx said:

Tell me everything i need and need to do to drop an EFI 351w into a foxbody. I was told that the lower intake manifold was the only thing different, parts wise, between the 351 and the 302, so theoretically, i could just change the lower intake manifold and then take everything else off the 5.0?
thanks

Click to expand...

Kid wita 5oh said:

lower intake is different(so unless you already have a cobra/gt40 you can't use you stock upper) the headers are different, the oil pan is different, the ac/ps bracket is differnt, and its taller so you need a cowl hood

TattooMatt--- the waters pumps are the same

Click to expand...

MustangGlx said:

ive got the lower intake, i need a different oil pan, and i need ac and p/s brackets, who sells the fox body swap kit? i knew i need a cowl hood, how big do you need? i have a 2 inch cowl hood in my basement thats in good shape is that enough or am i gonna need a 3 or 4 inch cowl? And for the headers, does someone make headers for a 351 in a fox chasis stang? im defintaly gonna try to have this done before summer vaca is over, because i still have a couple months of school, and i have to finish rebuilding the 351. so is there anything else i should keep in mind?

thanks

Click to expand...

MustangGlx said:

ive got the lower intake, i need a different oil pan, and i need ac and p/s brackets, who sells the fox body swap kit? i knew i need a cowl hood, how big do you need? i have a 2 inch cowl hood in my basement thats in good shape is that enough or am i gonna need a 3 or 4 inch cowl? And for the headers, does someone make headers for a 351 in a fox chasis stang? im defintaly gonna try to have this done before summer vaca is over, because i still have a couple months of school, and i have to finish rebuilding the 351. so is there anything else i should keep in mind?

thanks

Click to expand...

MustangGlx said:

thanks a bunch, what do you want for the bracket?

Click to expand...