3G Alternator & Idle Problems

89sleeper said:
Soldering was very easy for me.:shrug:

That may be true but I don't have a professional heavy duty crimper and I don't think most people do. Thats why I suggested soldering. I have tried to crimp those lugs before and it wasn't a very good connection. I would not trust it.

If you have access to one then go ahead and use it.

I used one a few days ago to attach the lugs to the 4ga cable for my 3g conversion.

One of the larger electrical distributors in my area had one you can rent for $35 for a 1/2 day.
Unfortunately,(fortunately in my case),a credit card is required to rent it which I don`t have.
The guy said no problem,just bring in your cable and eyelets and you can use it here for $10.

They can be hard to locate.I tried a starter/alternator rebuilder,they didn`t have one.Tried a garage that advertises vehicle electrical work as one of their specialties.They told me to crimp them in a bench vise,(idiots):nono:.
 
If you have a propane torch, you can solder them. As posted previously, tin the wire and the inside of the lug with solder. Then sick the wire in the lug and apply heat, and add solder.

Most auto parts stores have the cables with the lugs already crimped on them. Look for the starter relay (or solenoid) to starter cables.
 
jrichker said:
Most auto parts stores have the cables with the lugs already crimped on them. Look for the starter relay (or solenoid) to starter cables.


This was the initial plan,but my local parts guy said he couldn`t get the pre made cables in the lenghts I needed from the supplier he has,so I decided to make my own.It worked out being cheaper this way.

I don`t know if you can get the premade length 4ga cable with two different size eyelets attatched,eg,1/4" for the alternator terminal and 3/8" for the Mega-Fuse and solenoid connections?
 
I made the 3/8" eyelet work on my 3G. Dont ask how.

A good parts house will have a 4 gauge with eyelets on both ends starting at about 15" and going up to 40-50" in 5" (or so) graduations.

Good luck.
 
No, I did not want to trim the plastic so I put a nut on the alt's bolt to shim it out and then had enough room to add the ring terminal and another nut. It was not how I wanted to do it, but it worked.
 
How many wires should be hooked up to that bolt coming out the back of the alt? I have the 4# wire I put in with a ring terminal going to the starter solenoid, but then I also have a stock looking wire hooked up to the same bolt via a ring terminal I crimped onto the end that routes to what looks like the foglights/headlights and possibly something else, I didn't get a chance to trace exactly where it goes.
 
Well if you have this plug then 2, if not then just the 4 gauge. Unless someone had something else run off it for a power source.
3Galternator06.jpg
 
svasica said:
What exactly is that plug or where did you get it because I do NOT have it? The 4# wire you have coming off of the bolt goes to the starter solenoid?
It is a conversion pulg that you can get. I bought one when I did mine and it worked Great!

I bought it from here for $20. http://fordfuelinjection.com/index.php?p=67

Yes the 4# wire coming off the bolt goes to the hot side of the starter solenoid.

Read this and it should help.
http://fordfuelinjection.com/index.php?p=75