• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

3g fuse

  • Thread starter Thread starter wazazzle
  • Start date Start date Dec 21, 2005
W

wazazzle

New Member
Mar 30, 2005
618
1
0
In the dumpster behind McDonalds. WA
Dec 21, 2005
#1
  • Dec 21, 2005
  • #1
What size fuse am i suppose to be using for the inline fuse link? I read some people said 125, others use 150, but PA perf sells theirs with 200. Oh yeah, this is for the 3G alt upgrade onto my fox. Not much of an electrician, what are the pro's/con's of say 150 vs 200? If it makes a diff i have to run lights, wipers, full blast heater, 400watt system, cell charger, radar detector, that's about it
 

timewarped1972

Member
Jun 17, 2004
642
0
16
mesa, az
Dec 21, 2005
#2
  • Dec 21, 2005
  • #2
that fuse is just the burn point, if the regulator goes out and or the alternator starts to over charge the fuse goes before it fries something else.
if you have a 130 amp alt, 125 amp fuse wouldn't work, for obviouse reasons,......so you want 150 or 200....depending on the size alt........i think pa uses 200 because that will accomodate most high amp alternators as there are 160 amp alternators as well that couldn't use the 150 amp fuse. so the 200 is fine, it will still blow before it fries anything ( it's supposed to anyway).
 
W

wazazzle

New Member
Mar 30, 2005
618
1
0
In the dumpster behind McDonalds. WA
Dec 21, 2005
#3
  • Dec 21, 2005
  • #3
thanks timewarp
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 21, 2005
#4
  • Dec 21, 2005
  • #4
Use a fuse in the 125-150 amp range for a standard 3G installation. There is a considerable delay before a fuse blows due to a sustained overload.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 21, 2005
#5
  • Dec 21, 2005
  • #5
JR is right. I run a fuse that is 20 amps below the advertised amperage output of my alt.

Good luck.
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Dec 21, 2005
#6
  • Dec 21, 2005
  • #6
http://fordfuelinjection.com/index.php?p=67 has a nice setup to do the job if you are interested.
 
You must log in or register to reply here.

Similar threads

Black Jack: Dragstrip tuning. New records
  • FastDriver
  • May 29, 2015
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 47 48 49
Replies
967
Views
240K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sunday at 3:18 PM
FastDriver
S
3G PULLEY IDLE SPEED
  • SleepingStang
  • Nov 11, 2009
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Nov 13, 2009
87GT Drop Top
3G alt question
  • 1991notchbackLX
  • Nov 4, 2008
  • Fox 5.0 Mustang Tech
Replies
2
Views
827
Fox 5.0 Mustang Tech Nov 4, 2008
1991notchbackLX
7
How to determine proper fuse and wire size?
  • 795.0
  • Mar 9, 2008
  • Fox 5.0 Mustang Tech
Replies
4
Views
6K
Fox 5.0 Mustang Tech Mar 9, 2008
jrichker
R
What parts for a 3G Install????
  • roadrunner19va
  • Dec 18, 2006
  • Fox 5.0 Mustang Tech
Replies
2
Views
530
Fox 5.0 Mustang Tech Dec 18, 2006
dec322
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?