4.6 and nitrous

[Modular2v]

i have been thinking about nitrous on my car since the day i bought it. A guy that i know real well at ford thinks any amount of nitrous is bad for the 4.6 due to the crappy rods. I think a 75 shot wouldnt hurt though. Is he right? He is one of the die hard 5.0 guys that are use to coming stock with forged internals, so any rod that isnt forged looks like crap to him

 

[mogs01gt]

any 5.0 after 89, I think, have the same rods we have. Same type of metal I mean. If you have plenty of fuel, you dont have to worry about anything other than the puddling problem we have in our Intake. They like to EXPLODE.

 

[BVille99GT]

Nitrous is a great (cheap) power adder. I would recommed a dry shot instead of a wet shot for obvious reasons (plastic intake). Just don't go over 100 DRY shot without retarding timing, etc...


LOVE NITROUS

 

[Premium Speed]

Nitrous is a great (cheap) power adder. I would recommed a dry shot instead of a wet shot for obvious reasons (plastic intake). Just don't go over 100 DRY shot without retarding timing, etc...


LOVE NITROUS

try a 75 dry shot with at least 1 step colder plugs and buy all the safety equipment if this is your first time using nitrous. the rods are pretty much the same i believe and the 5.0's(stock) are not stronger to my knowledge.

 

[stangman]

any 5.0 after 89, I think, have the same rods we have. Same type of metal I mean. If you have plenty of fuel, you dont have to worry about anything other than the puddling problem we have in our Intake. They like to EXPLODE.

MOGS is right on it. if he has a 89+ tell him that & see how he reacts it ought to be funny. those 5.0 guys get on my nerves sometimes with stuff like that, they think they know more about the 4.6 than they really do

 

[BVille99GT]

try a 75 dry shot with at least 1 step colder plugs and buy all the safety equipment if this is your first time using nitrous. the rods are pretty much the same i believe and the 5.0's(stock) are not stronger to my knowledge.

Don't you think if he wants to spray, he should his homework.
I'm just given my $0.02

 

[torch03gt]

Do it, you won't be disappointed...especially after the first time you take out one of those pesky Z06 owners who think they own the world Like said before just make sure you get all the safety stuff and 1 step colder plugs

 

[chef_333]

question,

I have a wet system that I purchased and I want to do a 50 or 75 hp shot. Is their anyway to lessen the chances of blowing my plastic intake? You know it would seem that their would be a spray material that you could use to harden the intake. Plus my intake is the one with the metal front.

 

[Red2000GT]

Yes chef,use an rpm window switch and a full throttle activation switch. Set the rpm switch to no lower than 2750 and no higher than 6000.

 

[LS2 KLR]

I've been running a 100 shot for almost a year with no problems. Its an easy way to hurt an LS1s feelings.

 

[mpcv2000]

300 lbs + of 125 wet shot sprayed in my stock 2000 GT block and she's running perfectly , no oil consuming , nothing.

 

[NOSInjected00GT]

ive got a problem gettin my wet kit... i cant get the bottle
mount in the trunk right... something is always wrong with it.
how did u guys get it to stay put?

 

[mike2858]

where can you buy a 50-75 shot?

 

[mogs01gt]

The kits come with different jets and you use those to determine the Nitrous shot.

 

[Aibal]

Ive been using a 100 shot NX for 6 months. Never a problem. It drops my ET by 1.4 seconds in the QM. Probably the best $600 I spent on my stang. Always go wet.

 

[mogs01gt]

you got a link to that kit?

 

[yomny]

I have a question for you guys hope you can help out, i installed a nitrous works wet kit but i didn't install the fuel lines, so is basically dry, now i have one question about the jets, the kit has a little **** that says N20 jet 42= 75HP and the 55=100 hp, but a friend of mine told me that the jets are different for the wet and dry kits, that for a dry the 42 jet means 100HP and the 55=125 0r so is this correct, which jet is the 100 hp one. Thanks

 

[lopey4.6]

I have a question for you guys hope you can help out, i installed a nitrous works wet kit but i didn't install the fuel lines, so is basically dry, now i have one question about the jets, the kit has a little **** that says N20 jet 42= 75HP and the 55=100 hp, but a friend of mine told me that the jets are different for the wet and dry kits, that for a dry the 42 jet means 100HP and the 55=125 0r so is this correct, which jet is the 100 hp one. Thanks

Umm...stop what your doing and properly install that you have or you'll have a blown engine. Then after you get the kit installed properly call the manufacter and get he correct jet numbers/sizes.

 

[yomny]

Do you have a website or a place in which i could contat nitrous works? Or is NW's manufactored by someone else? Thanks for your response

 

[lopey4.6]

barrygrant.com or 706-864-8544