4 cyl conversion question

stangman11

Member

Feb 27, 2006

220

3

19

New Jersey

Sep 25, 2006

#1

• Sep 25, 2006

• #1

Ok i have a 92 notch that i just converted with all 87 GT drivetrain and componenets im at the point when i need to start doing the wiring for the engine. I have the computer and engine harness in the car not all hooked up yet but ive been told i need a speed density harness for the left side of the firewall instead because it used to be a mass air car if anyone can help with this pleaseeee. I need to get this car running and finished

 

Fett

New Member

Nov 2, 2004

766

6

0

Sep 25, 2006

#2

• Sep 25, 2006

• #2

If the PCM is an 87, then yes you will need a SD harness and MAP sensor...along with the correct vac lines. Did you get a complete engine, or have a complete car as a donar? Where did you get the engine and components?

 

9

90gtguyman

New Member

Sep 17, 2004

4

0

0

Sep 26, 2006

#3

• Sep 26, 2006

• #3

I got the engine computer and harness out of a doner car complete

 

stangman11

Member

Feb 27, 2006

220

3

19

New Jersey

Sep 27, 2006

#4

• Sep 27, 2006

• #4

I need to know if i need any other harness to get this thing to run cause ive been told there is a seperate harness on the drivers side firewall going behind the dash that gives power to the computer and other things.

 

bullitstang1313

Member

Jan 21, 2003

713

0

16

Indianapolis / Columbus, Indiana

Sep 27, 2006

#5

• Sep 27, 2006

• #5

What year mustang is the wiring and the computer from?