418w stroker witch intake & cam to get?

[Xtreme Limits]

I just ordered a 418w , im putting on my 215cc 2.08/1.60 Pro Action cyclone heads(they flow like 205afr heads/victor jr. heads), ill have a 10.0:1cr, 42lb injectors, 75mm Tb, an have 1.6rr,now what cam and intake will give me 500+hp/450+tq?
Edelbrock Victor 5.8 efi, or a TrickFlow R intake..
as for cams i was looking at the TrickFlow stage 2 cam<---is this good big enuff for 500+hp and should it pull too 6000+rpm , what would be a better cam?

 

[jjd975]

I think maybe Wilson and/or Edelbrock make a real nice Elbow style intake for the those motors. I have seen several EFI guys run those with the 400+ cube motors.

 

[fidstang]

If you only plan to rev it to 6500rpm then go with the victor 5.8. Higher then that I would suggest the box R from trickflow or may be the spyder EFI like jjd975 is talking about.

 

[fidstang]

I wonder if the new XFI cams would work with the bigger cubes. They got 480 out of a 342CHP motor in the last 5.0 superfords mag. That was with the trickflow box R and 90mm throttle body.