460+toploader into Fox questions?

David Kee Transmissions has the information as well as the parts you are looking for:
Late Model Mustang Conversions
From what I can tell it should be a straighforward swap. He suggest using a Mcleod bellhousing, however I am unsure if they have one for a 460. He has one from Lakewood listed on his site that will work. Hope this helps.
CJ

460 and auto-x, thats gonna plow right through anything, that wouldnt even be fun to just **** around in

460 swap

Hi, I am new to this forum but I have done the 460 , 4-speed swap.
I used a t10 from a 65 fairlane.
Hoooker makes some real nice 2'' headers, there are mounts available, I used the stock driveshaft, you have to remove the consul to install the 4-speed shifter, I took off the power brake booster and made a plate to moount the master cylinder directly to the firewall. Use a oil pan and tube from a 1984 F-250 4x4.
a aluminum 2 or 3 core radiator, elecric cooling fans, ,I used 2 off a taurus. It will sit and idle forever at 190*.
Have been at it for a year, the engine is a 1984 460 pickup engine, bored .060" and stroked to 4.5"
offy tunnelram,1x4, msd ignition, procomp heads,(like super cobra jets)
242* cam, .600 lift.
lots of work. the big problem is the cable cluth. I cant get it to work, so am going with a hydraulic setup , one that goed inside the bellhousing. just not enough room for the cable.hits the exhaust headers and burns the cable . don't even try it.(the cable)
This engine is awesome!! it is as responsive as a 327 chevy! does not act like a big block at all.