• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

4cyl swap

  • Thread starter Thread starter Mr. Rustypwnz
  • Start date Start date Oct 20, 2007

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Oct 20, 2007
#1
  • Oct 20, 2007
  • #1
ok im getting a 89 lx hatch soon, to replace my 86gt and my wrecked 7up vert, anyways, I have the engine, trans, rear, harness, computer, speedo cluster, springs, brakes and some other stuff needed

anyways, do I HAVE to swap the k member out of my 5.0 cars in to the 4banger to make it work? I already have mounts, and trans crossmember, and mount, so do I HAVE to do this? oh and will the 5.0 harness (1990) plug up in the 4 bangers place correctly, just asking because I want to do this once and thats it lol

thanks josh
 

89gt89

Member
May 28, 2005
57
0
6
Bothell, WA
Oct 20, 2007
#2
  • Oct 20, 2007
  • #2
You're 4 banger k member is exactly the same as the 5.0 so just pop your motormounts on and dump the V8 in. You'll need to match your engine harness to the 89, meaning the 90 will not work. The 89 is unique. Save yourself a major headache and buy an 89 engine harness to mate with the 89's dash harness etc. I'm almost done with my 91 Notch 4 to 8 swap. It's pretty easy, just don't get rid of the wrecked 90 cause you're gonna need alot of small bits and pieces. Good luck.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Oct 21, 2007
#3
  • Oct 21, 2007
  • #3
kewl thanks....
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Oct 21, 2007
#4
  • Oct 21, 2007
  • #4
89gt89 said:
You're 4 banger k member is exactly the same as the 5.0 so just pop your motormounts on and dump the V8 in. You'll need to match your engine harness to the 89, meaning the 90 will not work. The 89 is unique. Save yourself a major headache and buy an 89 engine harness to mate with the 89's dash harness etc. I'm almost done with my 91 Notch 4 to 8 swap. It's pretty easy, just don't get rid of the wrecked 90 cause you're gonna need alot of small bits and pieces. Good luck.
Click to expand...

this is correct. and i agree, find an 89 engine harness to match your 89 dash harness. when i did my 4 cyl conversion, my 4cyl coupe was an 88 and my donor car was a 92 GT. i tried to do it without switching out the dash harness and only a few of the plugs mated up. so i pulled it back out and used the dash harness from the 92 as well. went a lot smoother that way.
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Oct 21, 2007
#5
  • Oct 21, 2007
  • #5
this is so off topic but i dont want to start a thread about it. but what about the fuel lines from an 86 4cyl car? im going to swap in a v-8 do i have to take my 1990 coupes lines and swap them to the 86 4 cyl?
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Oct 21, 2007
#6
  • Oct 21, 2007
  • #6
BK_CAULEY said:
this is so off topic but i dont want to start a thread about it. but what about the fuel lines from an 86 4cyl car? im going to swap in a v-8 do i have to take my 1990 coupes lines and swap them to the 86 4 cyl?
Click to expand...

yes you will. the fuel and brake lines.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Oct 21, 2007
#7
  • Oct 21, 2007
  • #7
well good news!! the car is actually a 90, so my harness should plug right up!! btw: does anybody have like a 2-300 shot of gas so I can blow this thing up? lol im gonna make a movie of the destruction......
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Oct 21, 2007
#8
  • Oct 21, 2007
  • #8
slow95gt said:
well good news!! the car is actually a 90, so my harness should plug right up!! btw: does anybody have like a 2-300 shot of gas so I can blow this thing up? lol im gonna make a movie of the destruction......
Click to expand...

NO you need to sell it to fund your car getting fixed...
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Oct 21, 2007
#9
  • Oct 21, 2007
  • #9
sell what? im getting rid of the vert and the gt, and going to put everything in this hatch, its extremely straight, interior isnt that bad, needs cleaned, I has a dent into the drivers fender, the paint is peeling, and it has a flat tire, and 2 spots of primer and thats all, no bondo anywhere, no rust, nothing, drives fine the air is COLD and he wants like $400 for it, so I cant go wrong, ill just sell my interior, get rid somehow of my gt, then just transplant my crap over, like my sn booster and brakes and fuel pump and lines off the gt, harness off the vert, engine trans and rear, pony's, my 3.55's subframes, blah blah, anyways, it has more potential to be nicer than my gt, because of the body work involved, I mean I could do the suspension/brakes in 1 day if I was moving, then swap out the fuel lines, then the harness, then im home free pretty much....... it will be easy.
 
You must log in or register to reply here.

Similar threads

F
Electrical Foxbody wiring harness 2.3 to v8 swap
  • Foxbodyjake
  • Mar 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
1K
Fox 5.0 Mustang Tech Sep 7, 2026
Kleinjj27
K
C
Help with manual conversion
  • CPH89LX
  • Aug 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
716
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
2000xp8
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
597
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
7
What megasquirt kit to order
  • 74delta
  • Jul 4, 2026
  • Digital Self-tuning Forum
Replies
15
Views
659
Digital Self-tuning Forum Aug 26, 2026
fasterthangas
F
K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
565
Other Auto Tech Mar 3, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?