• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

4cyl to V8 swap thread AGAIN.....but with a twist!

  • Thread starter Thread starter BlueOvalStangGT
  • Start date Start date Aug 11, 2007

BlueOvalStangGT

Active Member
Oct 27, 2003
2,849
0
46
Tampa Florida....USF!!!
Aug 11, 2007
#1
  • Aug 11, 2007
  • #1
Tomorrow I am going to look at 2 notches being given away for free. I was thinking of building a super low budget fun car out of one. Its a 4cyl car...but I dont really need much. Its gonna be very much stripped down...with the end product having only the following(not much else):

Carbed stock 302 or carbed explorer motor
T5
carpet
two front seats
little to no wiring (no power windows, no dash harness, and I think for gauges just making my own setup with a few basic autometers and no stock gauges)
8.8 rear end
power steering MAYBE
radio


....pretty much a hot rod in a notchback shell.


The brakes dont need to be all that special, but I read in some threads I researched that i need to swap brake boosters? Is this a neccesity or will I not need this in a lightweight car like this? Does the 4cyl radiator and everything work fine? Basically what do I need to turn a stock 4cyl, to a bare bones v8 car?
 

91 HATCH

Banned
May 17, 2007
262
0
0
illinois
Aug 11, 2007
#2
  • Aug 11, 2007
  • #2
what is the twist on it the car seems pretty normal to me
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Aug 11, 2007
#3
  • Aug 11, 2007
  • #3
where is the twist?
now if you said you were going to stuff a 302 onto a honda rebel bike frame, then like hell yea. that would be an awesome twist, but gutting a four banger for a carbed motor is bread and butter
 

KAILUAZ

New Member
Jul 15, 2004
333
0
0
St Pete, FL via Kailua, HI
Aug 11, 2007
#4
  • Aug 11, 2007
  • #4
Added pics

I'm right along with you on this, my 96 notch is going the same direction.
The twist is everyone gets all fired up when you talk about it. Its pretty funny when you get away from the "norm" in the Stang world.
I too am stripping out the interior and running no dash at all, nothing but two front seats. Normal Stangers will go nuts saying why do it, your only saving a few pounds etc etc.
When I asked about running a stereo with no interior, Stangers went crazy asking why why why.
When I asked about cutting the cowl to use the high pressure area for the intake, Stangers near and far cringed at the thought of cutting into the sheet metal. I think its hilarious.
When you try to mix traditional hot rodding with Mustangs you get the twist!
Take a look at the majority of the Stangs here,,, they all begin to look the same. How many $$ paint jobs and cobra/bullet rims can you take. I'm sick of the "normal" looking Stang myself.
I say go for it, good luck,,, Viva La Résistance!!
I think this is one of the coolest looking Stangs out there:
http://www.wolfpackcc.com/forum/vbpicgallery.php?do=view&g=56

 

Attachments

  • 1030480176_c676420135_o.webp
    102.7 KB · Views: 114

KAILUAZ

New Member
Jul 15, 2004
333
0
0
St Pete, FL via Kailua, HI
Aug 11, 2007
#5
  • Aug 11, 2007
  • #5
And then come over to http://www.thestanggang.com/vbportal/forums/index.php and http://www.tamparacing.com/forums/ford-tech/ to introduce yourself. Lots of stuff going on in the area!
 

Matty22

New Member
Feb 16, 2007
10
0
0
Greenville, SC
Aug 11, 2007
#6
  • Aug 11, 2007
  • #6
www.stangbangerz.com has a nice little write up on this conversion.
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Aug 11, 2007
#7
  • Aug 11, 2007
  • #7
Matty22 said:
www.stangbangerz.com has a nice little write up on this conversion.
Click to expand...


We've got a lot of nice stuff


Also if you really wanna do something different, build up a nasty 289 HiPo to run 9k RPM and put THAT in a stripped down bare bones coupe....back it with an IRS so it corners like it's on rails, put a Viper Spec T56 behind it, and if that's not enough put a SMALL turbo on it to push maybe 6-8lbs of boost...small so it spools up quick as hell to make up for the softer bottom end you'll have with the 289. Give it a 5 lug swap with 17x9s all around, tubular K/A arms in the front....now THAT would be a twist.
 

Matty22

New Member
Feb 16, 2007
10
0
0
Greenville, SC
Aug 11, 2007
#8
  • Aug 11, 2007
  • #8
85_SS_302_Coupe said:
We've got a lot of nice stuff


Also if you really wanna do something different, build up a nasty 289 HiPo to run 9k RPM and put THAT in a stripped down bare bones coupe....back it with an IRS so it corners like it's on rails, put a Viper Spec T56 behind it, and if that's not enough put a SMALL turbo on it to push maybe 6-8lbs of boost...small so it spools up quick as hell to make up for the softer bottom end you'll have with the 289. Give it a 5 lug swap with 17x9s all around, tubular K/A arms in the front....now THAT would be a twist.
Click to expand...

I think he mentioned something about it being low budget but that does sound nice!
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Aug 11, 2007
#9
  • Aug 11, 2007
  • #9
Matty22 said:
I think he mentioned something about it being low budget but that does sound nice!
Click to expand...


It's tough to stop the daydreams once they get in motion
 

BlueOvalStangGT

Active Member
Oct 27, 2003
2,849
0
46
Tampa Florida....USF!!!
Aug 11, 2007
#10
  • Aug 11, 2007
  • #10
Never mind guys! I took a look at the coupes I was going to get and its gonna take quite a bit of TLC to get them where I would want! Maybe next year...
 

samickguy15

Member
Sep 1, 2005
404
0
16
Delavan, IL
Aug 13, 2007
#11
  • Aug 13, 2007
  • #11
Well for what its worth, the 2.3 and the 5.0 use the same radiator. That answers that question.
 
You must log in or register to reply here.

Similar threads

F
Electrical Foxbody wiring harness 2.3 to v8 swap
  • Foxbodyjake
  • Mar 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
719
Fox 5.0 Mustang Tech Apr 13, 2026
Foxbodyjake
F
8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
512
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
C
SN95 Another Coyote swap list
  • catkiller
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
131
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026
catkiller
C
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
733
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?