S snowdengt New Member Oct 2, 2010 1 0 0 Oct 2, 2010 #1 Oct 2, 2010 #1 Is it possible to take the heads and intake off of a 4v marauder and put them on a 2000 GT 2v? I can get the engine cheap but im told it needs a rebuild. So just looking at some ideas.
Is it possible to take the heads and intake off of a 4v marauder and put them on a 2000 GT 2v? I can get the engine cheap but im told it needs a rebuild. So just looking at some ideas.
crazystang25 Member Jan 25, 2009 492 0 16 Oct 2, 2010 #2 Oct 2, 2010 #2 U would be better off rebuilding the bottom end of the 4v motor.
trombonedemon Well-Known Member Jun 25, 2009 1,962 39 59 U.S.A, U.S.A., U.S.A.! Oct 2, 2010 #3 Oct 2, 2010 #3 I think you would lower your compression w/those heads on a 2v engine block, from what I understand that would be cool if you were going F.I.
I think you would lower your compression w/those heads on a 2v engine block, from what I understand that would be cool if you were going F.I.
crazystang25 Member Jan 25, 2009 492 0 16 Oct 2, 2010 #4 Oct 2, 2010 #4 Ya it would drop it down to about 8:1
slayerripkdc 15 Year Member Jun 3, 2003 1,341 16 59 brewster ny Oct 2, 2010 #5 Oct 2, 2010 #5 Rebuild the 4v and swap that bad boy in there, or throw on the 4v heads and run some decent boost .
mustang50v8 Member Feb 4, 2003 548 3 18 847 Chicago Burbs Oct 2, 2010 #6 Oct 2, 2010 #6 marauder heads = 03/04 cobra heads = avaitor heads = mach 1 heads