• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

5 Lug axle question

  • Thread starter Thread starter Coast2CoaStang
  • Start date Start date Jan 13, 2009

Coast2CoaStang

Member
Aug 11, 2008
254
4
19
Jan 13, 2009
#1
  • Jan 13, 2009
  • #1
I will be going to the junkyard this week to get my 5 lug axles. I am going to look for the ranger, bronco II, and Aerostar's for axles. I was told that I could also use 94-98 Mustang axles. Is this true? I thought the 94-04 rears had a wider track. Any help or info is appreciated. Thanks
 

Chuckman

GTFO you fat, heavy bastard
15 Year Member
Oct 21, 2005
1,604
1,002
173
st. louis, mo
Jan 13, 2009
#2
  • Jan 13, 2009
  • #2
94-98 axles are somewhere around 3/4" wider than stock or ranger axles, but they still work fine with the correct offset of wheels. 99-04 axles are even wider and REALLY need the right offset to work right on a fox, but again can be used to work.

the real reason to switch to the early sn axles is if you're also doing a rear disc conversion, as all the factory sn rear brake stuff will bolt up without any special brackets. if youre keeping drums though you have to use the ranger axles (which can be used with disc kits with a special bracket).
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jan 13, 2009
#3
  • Jan 13, 2009
  • #3
Chuckman said:
94-98 axles are somewhere around 3/4" wider than stock or ranger axles, but they still work fine with the correct offset of wheels. 99-04 axles are even wider and REALLY need the right offset to work right on a fox, but again can be used to work.

the real reason to switch to the early sn axles is if you're also doing a rear disc conversion, as all the factory sn rear brake stuff will bolt up without any special brackets. if youre keeping drums though you have to use the ranger axles (which can be used with disc kits with a special bracket).
Click to expand...

+1

I believe if you use the SN95 axles, you won't be able to use drums if that was what you were hoping to achieve. Look into northracecars.com for the brackets to use disks on a Fox-width (Ranger axles) rear end.
 

Coast2CoaStang

Member
Aug 11, 2008
254
4
19
Jan 13, 2009
#4
  • Jan 13, 2009
  • #4
I currently have gathered 94-04 style rear calipers and brackets, dust shields, and anti moan braces. I plan on using Bullitt, or Mach 1 rims (17").

So will I be ok using 94-98 V6/GT axles, and brackets? Thanks guys
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jan 13, 2009
#5
  • Jan 13, 2009
  • #5
Coast2CoaStang said:
I currently have gathered 94-04 style rear calipers and brackets, dust shields, and anti moan braces. I plan on using Bullitt, or Mach 1 rims (17").

So will I be ok using 94-98 V6/GT axles, and brackets? Thanks guys
Click to expand...

That should work.

Have you looked through this?

79-93 5 Lug Ford Fox Body Mustang Conversions
 

Coast2CoaStang

Member
Aug 11, 2008
254
4
19
Jan 13, 2009
#6
  • Jan 13, 2009
  • #6
NikwoaC said:
That should work.

Have you looked through this?

79-93 5 Lug Ford Fox Body Mustang Conversions
Click to expand...

Thanks for the link. After reading that, I guess I'll go the ranger route. I don't want to run into offset issues in case I decide to go with a wider rear wheel/tire combo. I appreciate the info. Thank you.
 

old_blue

15 Year Member
Nov 3, 2003
1,783
282
124
Jan 14, 2009
#7
  • Jan 14, 2009
  • #7
I used 96 axles (wider track) and ran a 255 rear tire with out much issue. After it was lowered it would rub a little with someone in the back seat.
 
You must log in or register to reply here.

Similar threads

8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
628
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Wheels-Tires LS mii swap and rear rim size/axle questions....
  • 78mIIman
  • Feb 2, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
6
Views
888
1974 - 1978 Mustang II Talk & Tech May 6, 2025
78 Mach1
Cobra Brake Conversion - Spare Wheel/Tire Search
  • AeroCoupe
  • Aug 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
502
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 2, 2026
AeroCoupe
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
880
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?