50oz c4 flexplate?

Modular2v · Jun 6, 2007

The only thing im missing (besides paint) on my street friendly notch is a flexplate....as guessed i traded out the fuel injection for a carb and the AOD for a c4.....this orginally was a 4cyl car and i pulled all the v8 hardware out of an LSC lincoln....Where can i find a 50oz flexplate for a c4 that mates up to a 302/windsor? Another thing.....what did all you 4cyl to 5.0 swap guys do about the alternator harness?

86nu · Jun 6, 2007

Modular2v said:
The only thing im missing (besides paint) on my street friendly notch is a flexplate....as guessed i traded out the fuel injection for a carb and the AOD for a c4.....this orginally was a 4cyl car and i pulled all the v8 hardware out of an LSC lincoln....Where can i find a 50oz flexplate for a c4 that mates up to a 302/windsor? Another thing.....what did all you 4cyl to 5.0 swap guys do about the alternator harness?

Bolt pattern is the same, anything that came factory with a c4 and a 302 will have the flex plate you need. Easiest thing to do is hung junk yards for older trucks and vans, and rob it from them.

Or just get a cheapie off the internet, hell TCI sells one for 90 bucks

Modular2v · Jun 6, 2007

86nu said:
Bolt pattern is the same, anything that came factory with a c4 and a 302 will have the flex plate you need. Easiest thing to do is hung junk yards for older trucks and vans, and rob it from them.

Or just get a cheapie off the internet, hell TCI sells one for 90 bucks

but wouldnt that be a 28oz balanced flexplate?

2002BLGT · Jun 7, 2007

Modular2v said:
but wouldnt that be a 28oz balanced flexplate?

year model of the engine/crank determines which weight you need , 80-up I believe is 50 oz TCI and B&M both make 50 oz C4 flexplates

Modular2v · Jun 8, 2007

2002BLGT said:
year model of the engine/crank determines which weight you need , 80-up I believe is 50 oz TCI and B&M both make 50 oz C4 flexplates

i know what weight i need.....its an 89 5.0 motor, which is obviously a 50oz balanced motor

86nu · Jun 8, 2007

Modular2v said:
but wouldnt that be a 28oz balanced flexplate?

No 28oz is the 351, find a 302 and it will have a 50oz flex plate,

2002BLGT · Jun 8, 2007

Modular2v said:
i know what weight i need.....its an 89 5.0 motor, which is obviously a 50oz balanced motor

ok gotcha , but you need a 50 oz 157tooth flexplate for the C4 , TCI and B&M both have ones available

B&M part number is 50239 $116.95 from summit

Modular2v · Jun 8, 2007

2002BLGT said:
ok gotcha , but you need a 50 oz 157tooth flexplate for the C4 , TCI and B&M both have ones available

B&M part number is 50239 $116.95 from summit

the 157 toothed flexplate will work with the stock starter correct? Im new to this automagic stuff and is that flexplate SFI certified?

2002BLGT · Jun 8, 2007

Modular2v said:
the 157 toothed flexplate will work with the stock starter correct? Im new to this automagic stuff and is that flexplate SFI certified?

Ive swapped a few and never had a problem

50oz c4 flexplate?

Modular2v

86nu

New Member

Modular2v

2002BLGT

Well-Known Member

Modular2v

86nu

New Member

2002BLGT

Well-Known Member

Modular2v

2002BLGT

Well-Known Member

Similar threads

50oz c4 flexplate?

New Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Similar threads

Privacy & Transparency

Privacy & Transparency