stock 1970 d0oe heads (like gt-40s) http://cgi.ebay.com/ebaymotors/ws/e...item=280046042240&ssPageName=ADME:L:LCA:MT:11
E7TE Heads
http://cgi.ebay.com/ebaymotors/ws/e...item=280046046892&ssPageName=ADME:L:LCA:MT:11
2 65-66 mustang fenders, sand blasted with alittle filler. great shape.
new 66 mustang black dash pad (stored 6 years so its dirty).
2 fron 66 mustang seats, needs upolstery.
complete 66 mustang wiring, all in great shape except for the rear (can be repaired).
complete 66 mustang A/C system w/ heater and controls. all brackets and new P/S pump (no pulley). (condensor has very minor damage on the fitting and is easily repairable)
2 complete ford 9" rear third members, both open diff. 3.10 and 4.11 gear rings.
set of front and rear 65-66 mustang bumpers.
65-66 mustang front and rear valance.
set of 69-70 mach1 seats, needs upolstery.
I also have almost everything you would need to convert to EFI.
5.0l upper and lower intake, throttle body, EGR spacer, fuel rails complete with regulator and 16 19# injectors, acc. brackets with water pump, alternator, a/c compressor, power steering pump (pulley removed but included), Timing chain cover, damper, and a A9P PCM in great shape.
All thats needed is a harness, tensioner, and a few little things.
I have alot of other parts also so let me know what you need. I can ship most items, even the fenders ($$$$).
Let me know if you have any questions. It will end up on ebay if not sold soon.
PM me or EMAIL me at Lucafu1@aol.com with what you want and price. Need a price so I can move this stuff out.
No reasonable offer refused, but please no low balling.
Thank you!
Luis
E7TE Heads
http://cgi.ebay.com/ebaymotors/ws/e...item=280046046892&ssPageName=ADME:L:LCA:MT:11
2 65-66 mustang fenders, sand blasted with alittle filler. great shape.
new 66 mustang black dash pad (stored 6 years so its dirty).
2 fron 66 mustang seats, needs upolstery.
complete 66 mustang wiring, all in great shape except for the rear (can be repaired).
complete 66 mustang A/C system w/ heater and controls. all brackets and new P/S pump (no pulley). (condensor has very minor damage on the fitting and is easily repairable)
2 complete ford 9" rear third members, both open diff. 3.10 and 4.11 gear rings.
set of front and rear 65-66 mustang bumpers.
65-66 mustang front and rear valance.
set of 69-70 mach1 seats, needs upolstery.
I also have almost everything you would need to convert to EFI.
5.0l upper and lower intake, throttle body, EGR spacer, fuel rails complete with regulator and 16 19# injectors, acc. brackets with water pump, alternator, a/c compressor, power steering pump (pulley removed but included), Timing chain cover, damper, and a A9P PCM in great shape.
All thats needed is a harness, tensioner, and a few little things.
I have alot of other parts also so let me know what you need. I can ship most items, even the fenders ($$$$).
Let me know if you have any questions. It will end up on ebay if not sold soon.
PM me or EMAIL me at Lucafu1@aol.com with what you want and price. Need a price so I can move this stuff out.
No reasonable offer refused, but please no low balling.
Thank you!
Luis