A Andrew Benz New Member Apr 22, 2017 2 0 1 Apr 22, 2017 #1 Apr 22, 2017 #1 Hi everyone I'm Andy I recently bought a 87 gt 5.0 spd roller got a motor now I'm looking for a t5 I found a built t5 with stage 3 clutch and a3.35 gear ratio out of a 3.8 v6 will this tranny fit my semi built 302 with the 5.0 bell housing
Hi everyone I'm Andy I recently bought a 87 gt 5.0 spd roller got a motor now I'm looking for a t5 I found a built t5 with stage 3 clutch and a3.35 gear ratio out of a 3.8 v6 will this tranny fit my semi built 302 with the 5.0 bell housing
Mustang5L5 That is…until I whipped out my Bissell Mod Dude Feb 18, 2001 43,276 17,966 224 Massachusetts Apr 22, 2017 #2 Apr 22, 2017 #2 What year v6 did it come out of?
A Andrew Benz New Member Apr 22, 2017 2 0 1 Apr 22, 2017 #3 Apr 22, 2017 #3 Doesn't say the 94 95 I'm pretty sure
Mustang5L5 That is…until I whipped out my Bissell Mod Dude Feb 18, 2001 43,276 17,966 224 Massachusetts Apr 24, 2017 #4 Apr 24, 2017 #4 You'll need to swap the input shaft and bearing retainer out for one from a 90-93 t-5 unit. Then it will bolt into your current fox 5.0 bellhousing. Later V6's went electronic speedo, but you should be able to tell if you have a mechanical or electronic speedo by looking at it.
You'll need to swap the input shaft and bearing retainer out for one from a 90-93 t-5 unit. Then it will bolt into your current fox 5.0 bellhousing. Later V6's went electronic speedo, but you should be able to tell if you have a mechanical or electronic speedo by looking at it.