• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

88 5.0 LX HELP !!!

  • Thread starter Thread starter 1980pintobean
  • Start date Start date Jan 12, 2008

1980pintobean

New Member
Jan 12, 2008
3
0
0
Jan 12, 2008
#1
  • Jan 12, 2008
  • #1
I BOUGHT A 88 5.0 LX, HERE ARE A FEW THINGS THAT WERE DONE TO IT BEFORE I BOUGHT IT. CAM SWAP NOT SURE WHAT CAM WAS USED. IT HAS A 410 GEAR, RATCHET SHIFTER, LINE LOCK. NEW EXAUST WITH FLOWS. THE 02 SENSORS HAVE BEEN REMOVED. I AM NOT TOO FAMILAR WITH THE FUEL INJECTED 5.0 THE CAR IDELS AT 2000 RPM & HAS A STUDDER IN IT WHEN YOU GIVE IT GAS. I WAS TOLD I NEEDED TO CONVERT IT TO A MASS AIR SET UP WITH COMPUTER AND ECT. WILL THIS FIX MY IDELING ? WILL IT BE BETTER TO CONVERT IT TO A CARB SETUP.IF SO IS THERE ANYTHING SPECIAL IN CONVERTING TO CARB THAT I NEED TO KNOW? THE CAR IS NOT A DAILY DRIVER, I PLAN ON RACING IT & JUST CRUISE IT THREW TOWN.


THANKS FOR ANY HELP
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jan 13, 2008
#2
  • Jan 13, 2008
  • #2
You need to make a signature or tell us what other mods you have. I'm a fan of efi and labtop tuning so I would stay with efi. Carb will just cost more imo and more of a hassle. Assuming you are speed density and if you do have an aftermarket just switch to mass air and be done. First try turning down the idle on the throttle body then reset the tps to under 1 volt. Do a search and you'll find out how to. If not or also just check for vacuum leaks, that will cause a high idle. When I put in a cam when I was speed density it just ran really rich and barely idled, so reset your idle first.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jan 14, 2008
#3
  • Jan 14, 2008
  • #3
1980pintobean said:
I BOUGHT A 88 5.0 LX, HERE ARE A FEW THINGS THAT WERE DONE TO IT BEFORE I BOUGHT IT. CAM SWAP NOT SURE WHAT CAM WAS USED. IT HAS A 410 GEAR, RATCHET SHIFTER, LINE LOCK. NEW EXAUST WITH FLOWS. THE 02 SENSORS HAVE BEEN REMOVED. I AM NOT TOO FAMILAR WITH THE FUEL INJECTED 5.0 THE CAR IDELS AT 2000 RPM & HAS A STUDDER IN IT WHEN YOU GIVE IT GAS. I WAS TOLD I NEEDED TO CONVERT IT TO A MASS AIR SET UP WITH COMPUTER AND ECT. WILL THIS FIX MY IDELING ? WILL IT BE BETTER TO CONVERT IT TO A CARB SETUP.IF SO IS THERE ANYTHING SPECIAL IN CONVERTING TO CARB THAT I NEED TO KNOW? THE CAR IS NOT A DAILY DRIVER, I PLAN ON RACING IT & JUST CRUISE IT THREW TOWN.


THANKS FOR ANY HELP
Click to expand...
1. Hook up the O2's
2. Reset Base Idle - http://www.muscularmustangs.com/idlereset.php
3. Clear the KAM and check for new codes

Is the ECT sensor hooked up?

You may get more help in the General Tech section...

jason
 
You must log in or register to reply here.

Similar threads

S
Progress Thread Hello from Nashua, NH
  • sevenup
  • Oct 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
197
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 28, 2026
sevenup
S
Old guy new to Forum.
  • 08shelby GT500
  • Jun 15, 2026
  • The Welcome Wagon
Replies
3
Views
248
The Welcome Wagon Jun 15, 2026
LILCBRA
G
Fox Tire Size for 16" Pony Wheels on 1984 LX Convertible
  • gw7
  • Jun 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
245
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 25, 2026
Qtrhrse23
J
88 Foxbody 5.0 Driveshaft Issue! Need Help
  • James Hood
  • May 1, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
571
Fox 5.0 Mustang Tech May 1, 2025
AeroCoupe
Progress Thread 93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 3, 2025
Scrapla347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?