Hey I’m new here and just got my second foxbody
I found a clean one with low miles and I’m the second owner
I bought it knowing it didn’t start and I thought I would a easy and simple fix (might still be)
The person I got it from said a fuel line was broken and that’s why it did not run
So I found and “fixed” the fuel lines
They were the return and pressure line right before the metal lines ran up to the fuel pressure regulator and other thing I don’t know
I changed all the basic tune up ignition components including the icm on the distributor
And had a hard time getting it all lined back up
And it still doesn’t start
It cranks and blows smoke out off the throttle body while cranking
Does anybody know what i did wrong and if I did the fuel lines right
All Hazing is accepted as long as your helpful
Thanks
Will post pictures of my setup next day
I found a clean one with low miles and I’m the second owner
I bought it knowing it didn’t start and I thought I would a easy and simple fix (might still be)
The person I got it from said a fuel line was broken and that’s why it did not run
So I found and “fixed” the fuel lines
They were the return and pressure line right before the metal lines ran up to the fuel pressure regulator and other thing I don’t know
I changed all the basic tune up ignition components including the icm on the distributor
And had a hard time getting it all lined back up
And it still doesn’t start
It cranks and blows smoke out off the throttle body while cranking
Does anybody know what i did wrong and if I did the fuel lines right
All Hazing is accepted as long as your helpful
Thanks
Will post pictures of my setup next day