• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

9.5" wide rims with stock 235/50-18's? help!!

  • Thread starter Thread starter 642mx
  • Start date Start date Mar 7, 2011

642mx

Member
Feb 23, 2011
145
6
18
Mar 7, 2011
#1
  • Mar 7, 2011
  • #1
I found a set of rims from the 2010 GT500 that I'm thinking about getting for my 2011 GT.

They are 9.5" wide. Any problems with the stock rubber fitting (235/50-18's)? I only have 600 miles on the stock tires, so I don't want to spring for tires yet.

Also, any clearance issues? Will they stick out farther than my stock 18" wide spokes? I'm not sure how wide the "wide spokes" rims are....

Any and all help is much appreciated!!!
 

AvalancheSVT

10 Year Member
Jun 12, 2005
573
37
49
Mar 7, 2011
#2
  • Mar 7, 2011
  • #2
you CAN but it'll look stupid as hell defeating the whole purpose of buying new wheels while simultaneously giving you worse traction (also defeating the purpose of new wheels).

get the wheels if you want and save for tires.
 

642mx

Member
Feb 23, 2011
145
6
18
Mar 8, 2011
#3
  • Mar 8, 2011
  • #3
I'm not super concerned with traction... the automatic behind the 5.0L really doesn't get crazy frying the tires anyways, but I don't want it to look goofy.

Do you know how wide the stock rims are? And what size tire would look the best with the 9.5" rims?

Thanks!!!
 

arcwcb

Member
Oct 26, 2009
417
2
19
Pennsylvania
Mar 8, 2011
#4
  • Mar 8, 2011
  • #4
The best fitment for an 18x9.5 is a 255/45, although I'm sure they could take wider than that. I'm with Makoto though, get the wheels, but save up until you can get some good tires, it will look weird with a tire as narrow as a 235 on a 9.5" rim.
 

642mx

Member
Feb 23, 2011
145
6
18
Mar 8, 2011
#5
  • Mar 8, 2011
  • #5
The problem isn't money... its just hard to justify buying rubber when I still have tits on the stock tires.

A 20mm wider tire would look better, but that's less than an inch difference.... I may try to find some 8" or 8.5's instead.... decisions, decisions...
 

AvalancheSVT

10 Year Member
Jun 12, 2005
573
37
49
Mar 9, 2011
#6
  • Mar 9, 2011
  • #6
642mx said:
The problem isn't money... its just hard to justify buying rubber when I still have tits on the stock tires.

A 20mm wider tire would look better, but that's less than an inch difference.... I may try to find some 8" or 8.5's instead.... decisions, decisions...
Click to expand...

if you just hate your stock wheels that bad sell the wheels and tires after you buy some new wheels and tires. thats what i'd do if money wasn't an issue at all. otherwise just rock the stockers while you decide on wheels to buy.
 

642mx

Member
Feb 23, 2011
145
6
18
Mar 9, 2011
#7
  • Mar 9, 2011
  • #7
Thanks for the advice! I'm going to keep the stockers on for a little while and see what happens. I just want to change them out so it doesn't look like everyone else's car.

So far I've added a Roush axle back exhaust and MGP caliper covers (red).... I think I'll change the spoiler next.
 
6

60sIron

New Member
Aug 14, 2010
16
0
1
Mar 14, 2011
#8
  • Mar 14, 2011
  • #8
GT500 Rims

I got a set of 2007 GT500 rims for my snow tires (they were cheap). They are 9.5 outside to outside wide, but tire guys call them 8.5 because they care about the inside width.

I'm running them with 255R45 18" and they work, but they would be better with wider tires. I'm not sure 235s would stretch all the way across.

-Jason
 
You must log in or register to reply here.

Similar threads

B
Tire size question 1986 gt hatchback
  • B0udreaux
  • Jan 12, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
607
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 17, 2026
B0udreaux
B
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
499
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Yesterday at 5:49 PM
85GT4V
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
209
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
Tightening upper control arm bushings at ride height dilemma… need some help
  • AnthonyA1234
  • Dec 27, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
51
Views
5K
Fox 5.0 Mustang Tech Feb 27, 2025
General karthief
Wheels-Tires LS mii swap and rear rim size/axle questions....
  • 78mIIman
  • Feb 2, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
6
Views
738
1974 - 1978 Mustang II Talk & Tech May 6, 2025
78 Mach1
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?