Head down to the home store and get a coupler from the sewer pipe section.
Seriously, I am pretty sure Daggar has posted a place to get big couplers like that before (if you need to know real quick here). I would look but I gotta get to bed.
For my application, the whole thing would not fit into the fenderwell. I ran out of room where the conical filter came into contact with the braces that support the nose of the car. To fix this probem, I used one of these:
It can be found here: http://store.airflo.com/45hl4.html
You will also need to replace the 4 in to 3 in reducer that comes with the Power Pipe with a straight 4 in coupler. I got mine from a ricer shop nearby (why they had 4 inch, I'll never know).
I looked at the site that was listed by someone else in this thread... It's nice stuff. The only trouble that I see is that the largest piece they listed is only 3 inches.
I bought my conical filter from Anderson as well. Make sure you tell them that you need it in 4 inch or they'll sell you the one that goes with that Power Pipe (3.5 inch).