Last night my daughter's 90 Vert caught fire. It appears the guy I bought it from had some larger amp and when he took it out he left the power wire connected and used tape to cover it. Well needless to say this tape failed and started a fire. The battery, tray and solenoid area are toast. Looking at the wires it seems that the wires going back into the car, over the shock tower are not burned. My thinking is to get a harness from another bone yard stang from that area and splicing it in will work. Does anyone have a diagram of that area so I can check all the wiring before heading to the bone yard. Does anyone think that the ECC may be fried? She did turn the key off when the engine died. I figure that this may have shut down the power path to the ECC. Anyone know if the Airbag wiring runs there as well? On my 93 there is one sensor which has its wiring under the tray. The tray itself isn't burned just melted from the acid and a bit deformed. Any help help or information will help.
Thanks. BTW she is bummed that her Steed is hurt. To help cheer her up I went to wally mart and saw a cool flease pull over jacket with the Mustang Pony on it. She saw that and got a huge smile on her face and asked me when her pony will be fixed. She even offered to hit the boen yard to help me. GO figure!
Thanks. BTW she is bummed that her Steed is hurt. To help cheer her up I went to wally mart and saw a cool flease pull over jacket with the Mustang Pony on it. She saw that and got a huge smile on her face and asked me when her pony will be fixed. She even offered to hit the boen yard to help me. GO figure!
