91' stang-turn signals wont work

[Ripper8769]

I just recently bought my mustang and about two days later my turn signals go out for about 10 mins and come back. The next day it does the same thing. I talked to my uncle about it and we looked at the fuse box which didnt label where anything was so we checked every fuse and they were all ok except a green 30 which was melted, and we replaced that and it still didnt work. The emergancy flashers will work from and back, but the signals wont. You guys have anything that'll help me?
Corey

 

[Paul C.]

I had a wierd problem;my blinkers and a/c worked intermittently. Turns out the wide gray plug inside the steering column was not making good contact.Got a big zip tie and cinched that baby tight. Been working for several months now.HTH

 

[Asha'man]

Yep, sounds like the ignition switch to me. It's a $12 part, you might as well just replace it.

Ash

 

[Ponycar]

FoMoCo has a safety recall out for ignition switches. Call a service center and give them your VIN. They will check and see if it needs to be done, it's FREE
Had all the same problems as you guys did; not anymore

 

[Ripper8769]

Thanks

thanks a lot. I'll call in there after school and see what they can do for me.

 

[78cobra347]

Check the flasher its behind the radio on passenger side i had this prob 2 weeks ago,its a dumb place for a flasher.

 

[Xanax]

Yep, sounds like the ignition switch to me. It's a $12 part, you might as well just replace it.

Ash

It's either the ignition switch like this guy said or a bulb.
First replace the bulb if that doesn't work go to Ford and purchase
the ignition switch and install it that should do the trick.

 

[Ripper8769]

Flasher

My uncle knows this guy that owns a auto shop and he replaced the flasher for free and it works now. So that's what was wrong with it...the flasher.