• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

92 Gt Door Replacement

  • Thread starter Thread starter Amoroq
  • Start date Start date Jan 7, 2017
  • Tags Tags
    door replacement
  • 1
  • 2
Next
1 of 2 Next Last
A

Amoroq

New Member
Jan 7, 2017
9
0
1
Jan 7, 2017
#1
  • Jan 7, 2017
  • #1
Well, I'd like to say I'm very much new here...and something rather crappy has happened earlier today which I'm still sick from...and feel incredibly dumb for. Anyway this is the damage.

I haven't had a quote for it yet as the body shops in my area are closed and will not open til Monday morning so I figured I'd get an idea. My question is how much would it be to replace it? Door won't open at all and window is busted out. I'm guessing around 3k?
 

Attachments

  • IMG_1693.webp
    733 KB · Views: 252
Last edited: Jan 7, 2017

General karthief

wonder how much it would cost to ship you a pair
5 Year Member
Aug 25, 2016
27,844
10,520
203
polk county florida
Jan 7, 2017
#2
  • Jan 7, 2017
  • #2
Man that sucks, those doors are all over the place, at least here in Fl. Where you at? If you look for your own door make sure you check the bottom and pull the door panel off and check for rust inside. If you have a power door (most do) get a power door, don't be convinced you can change a non power one over. Good luck and welcome aboard.
 
Reactions: Davedacarpainter
A

Amoroq

New Member
Jan 7, 2017
9
0
1
Jan 7, 2017
#3
  • Jan 7, 2017
  • #3
Well I'm in KY. I've searched online and I can not find an actual door. I find everything else but an actual panel. I did find one on eBay buts it's a passenger door, might have to check junkyard for at least the bare minimum. The interior is unscathed so at least I can have the same interior without much trouble; at least that's what I believe...tryin to be positive.

I appreciate the welcome and reply.
 

General karthief

wonder how much it would cost to ship you a pair
5 Year Member
Aug 25, 2016
27,844
10,520
203
polk county florida
Jan 7, 2017
#4
  • Jan 7, 2017
  • #4
Stop by a towing service or body shop and grab some of that cling wrap they put on wrecks and wrap it up till you get a door. There out there just be patient and get the best one you can, that wreck wrap stuff works great to keep junk out, use it and keep us posted, unlike the goverment we ARE here to help.
 
A

Amoroq

New Member
Jan 7, 2017
9
0
1
Jan 7, 2017
#5
  • Jan 7, 2017
  • #5
I really appreciate it. Right now I've got it tarped so nothing can get into it; wrapped a bit tight so it doesn't fly off and tied down. Truly it was heartbreaking after it happened.

Just hopin it's not what I think it is; I'd be happy with paying 2.5k. Again, I appreciate the responses.
 
A

Amoroq

New Member
Jan 7, 2017
9
0
1
Jan 7, 2017
#6
  • Jan 7, 2017
  • #6
I really appreciate it. Right now I've got it tarped so nothing can get into it; wrapped a bit tight so it doesn't fly off and tied down. Truly it was heartbreaking after it happened.

Just hopin it's not what I think it is; I'd be happy with paying 2.5k. Again, I appreciate the responses.
 

General karthief

wonder how much it would cost to ship you a pair
5 Year Member
Aug 25, 2016
27,844
10,520
203
polk county florida
Jan 7, 2017
#7
  • Jan 7, 2017
  • #7
Amoroq said:
I really appreciate it. Right now I've got it tarped so nothing can get into it; wrapped a bit tight so it doesn't fly off and tied down. Truly it was heartbreaking after it happened.

Just hopin it's not what I think it is; I'd be happy with paying 2.5k. Again, I appreciate the responses.
Click to expand...
What do you mean by 'hoping it's not what I think it is'.
What do you think it is? 2.5 k for what?
 
A

Amoroq

New Member
Jan 7, 2017
9
0
1
Jan 7, 2017
#8
  • Jan 7, 2017
  • #8
Pricing and all that stuff. I'm overexagerating.
 

General karthief

wonder how much it would cost to ship you a pair
5 Year Member
Aug 25, 2016
27,844
10,520
203
polk county florida
Jan 7, 2017
#9
  • Jan 7, 2017
  • #9
Take a deep breath there grasshopper, unless you've twisted the area where the hinges mount to the body your fine and I doubt thats happened.
 
A

Amoroq

New Member
Jan 7, 2017
9
0
1
Jan 7, 2017
#10
  • Jan 7, 2017
  • #10
Trust me, I haven't had this car but a day and that happened. I'll post some more pics tomorrow. I'll be sure to post em then.
 

General karthief

wonder how much it would cost to ship you a pair
5 Year Member
Aug 25, 2016
27,844
10,520
203
polk county florida
Jan 7, 2017
#11
  • Jan 7, 2017
  • #11
Get a pic of the door jamb with the door open and the area of the rocker/door sil and we can get an opinion from @Davedacarpainter
 

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Jan 7, 2017
#12
  • Jan 7, 2017
  • #12
It's kind of hard to tell about interior damage.

Does the door still open? Did the 1/4 jamb get tweaked when the door pulled on the striker?

Let's get a guy from your area to chime in, he may be able to help you find a replacement door. @RaggedGT

There's no way that it will cost anything like what your thinking. It can be even cheaper if you get a door to take to the shop you choose. With that green, it would be good to blend the paint on the 1/4 and front fender.
 
Reactions: RaggedGT

RaggedGT

Been here over a DECADE and still no CT
Mod Dude
Jul 20, 2014
4,733
3,175
203
Taylorsville ky
Jan 8, 2017
#13
  • Jan 8, 2017
  • #13
Sorry about you accident buddy.
A quick craigslist search netted me about 4 posts parting on foxes,and they all had doors lol. Depending g where in Ky you are I can point you in the right direction
 

Mstng93SSP

You have a nice rear end there Dave.
15 Year Member
Nov 29, 1999
2,993
3,500
184
Mililani, Hawaii
Jan 8, 2017
#14
  • Jan 8, 2017
  • #14
I buy craigslist doors usually for $50 or less and keep them as spares. I have 3 sets but I'm too far away to help you. My point is keep looking on craigslist and junkyard. You will find a door.
 
Reactions: Davedacarpainter
A

Amoroq

New Member
Jan 7, 2017
9
0
1
Jan 8, 2017
#15
  • Jan 8, 2017
  • #15
Thank you all for your responses. I did take some more pics and I did try to get the door open from the outside, inside, and within the door. I could not get it to budge not one bit. Here's what I got.
 

Attachments

  • IMG_1695.webp
    166.2 KB · Views: 269
  • IMG_1696.webp
    109.5 KB · Views: 285
  • IMG_1699.webp
    195.5 KB · Views: 252
  • IMG_1700.webp
    373.4 KB · Views: 269
A

Amoroq

New Member
Jan 7, 2017
9
0
1
Jan 8, 2017
#16
  • Jan 8, 2017
  • #16
Thank you all for your responses. I did take some more pics and I did try to get the door open from the outside, inside, and within the door. I could not get it to budge not one bit. Here's what I got.
 

Attachments

  • IMG_1699.webp
    195.5 KB · Views: 289
  • IMG_1700.webp
    373.4 KB · Views: 278

General karthief

wonder how much it would cost to ship you a pair
5 Year Member
Aug 25, 2016
27,844
10,520
203
polk county florida
Jan 8, 2017
#17
  • Jan 8, 2017
  • #17
The door is junk so get jig saw and cut an opening level with the striker, big hole, take a hammer and hit the door latch straight towards the door jam, you may have to use a pipe or rod against the latch and hit it with a hammer, you should be able to relieve the pressure on the striker.
 
Reactions: Davedacarpainter

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Jan 8, 2017
#18
  • Jan 8, 2017
  • #18
Yep, pretty much what @karthief says.

You'll want to get it open to see what the rest of the damage might be. You might be lucky and not have any 1/4 jamb damage. If there isn't any, find a replacement door and put it on there till you can afford paint.
 
Reactions: Shakerhood

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 10, 2017
#19
  • Jan 10, 2017
  • #19
75-150 for a door, 500 for paint... that's my guess

These cars are plentiful
 
A

Amoroq

New Member
Jan 7, 2017
9
0
1
Jan 11, 2017
#20
  • Jan 11, 2017
  • #20
Yeah, I have been checkin around. I did find someone on Craigslist who has quite a bit of parts for foxbodies. I was way out of it at the time just because it had just happened and was fearing for the worst.

So as of right now, I'm still checkin around for some. Due to some really crappy timing of some things; weather and work primarily, I am goin to a junkyard to look around.

UPDATE: so I went and got it looked at, and they said the rocker is bent in several inches and quoted me around 3k like I originally expected but I'm gonna scavenge for parts and do what I can to lower it down.
 
Last edited: Jan 11, 2017
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

M
Too much for me to repair in my current housing situation
  • My Drama Magnet 04 Gt
  • Apr 1, 2026
  • The Welcome Wagon
Replies
8
Views
250
The Welcome Wagon Apr 14, 2026
Noobz347
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
428
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
S
Fox New to me 82 GT
  • Stangman7082
  • Jan 20, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
41
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 18, 2025
AeroCoupe
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
831
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
45
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Feb 4, 2026
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?