Progress Thread '93 Kenne Bell Notch

James V · Nov 18, 2019

I think I'm going to need a sn95 timing cover, water pump and crank pulley. Does all of this bolt right on to the 5.0 engine? The seller gave me the alt and ps pump brackets. Hopefully this wont interfere with my mechanical fan.

James V · Jan 1, 2020

A little winter time progress update for you guys: got a new set of weld wheels and tires for cheap. I love the look of the big tires in the rear and decided not to use the skinnes but now I have to pick a good looking front wheel to complete it all. As far as the supercharger install, I've been crazy busy at work lately but have gone to the garage every chance I get. It's getting there. Everytime I start working on it, i realize i need to buy something else to finish it all. Heres what I've done so far, Sn95 brackets on (few more tweaks to go on em) Still need to change fuel pump, fuel injectors, water pump, wire new fan controller, delete charcoal canister, delete coolant heater tubes, and hopefully a paint job by Summer.

James V · Jan 1, 2020

Does anyone have a good solution for me to get this to work? I'm using SN95 accessory brackets to support the supercharger I just bought, but now the alternator is hitting the fuel lines. What's the easiest (and cheapest) solution for this guys?? Thanks!

General karthief · Jan 1, 2020

94-5 fuel lines have a different angle, maybe use them?
You will need the rails too.

James V · Jan 1, 2020

General karthief said:
94-5 fuel lines have a different angle, maybe use them?
You will need the rails too.

Hmm I was hoping to avoid buying new rails and lines, but I think that's what I might need to do. Is there anyway to bend these stock lines I have now?

General karthief · Jan 1, 2020

I doubt it, it may even crack the chrome and turn rusty

Steel1 · Jan 2, 2020

I believe you can get braided lines with the correct disconnect ends on them, that would give you some flexibility.

kendawg73 · Jan 2, 2020

Russell Mustang -6 AN Stainless Steel Fuel Line Kit (86-93) 651104

Russell's 1986-1993 Mustang stainless steel -6 AN fuel line kit is a great upgrade for stock fuel hoses.

lmr.com

Steel1 · Jan 2, 2020

kendawg73 said:
Russell Mustang -6 AN Stainless Steel Fuel Line Kit (86-93) 651104

Russell's 1986-1993 Mustang stainless steel -6 AN fuel line kit is a great upgrade for stock fuel hoses.

lmr.com

Exactly

James V · Jan 2, 2020

kendawg73 said:
Russell Mustang -6 AN Stainless Steel Fuel Line Kit (86-93) 651104

Russell's 1986-1993 Mustang stainless steel -6 AN fuel line kit is a great upgrade for stock fuel hoses.

lmr.com

Out of stock.. I'll take a look around though. Thanks

kendawg73 · Jan 2, 2020

James V said:
Out of stock.. I'll take a look around though. Thanks

summit showed some in stock, as well as Amazon... I will be ordering some for my Birthday next month myself... lol

James V · Jan 11, 2020

Beautiful day in CT today, a good day to continue the progress I've been making. This is the furthest I've ever been inside of an engine before, so it pretty interesting seeing how things inside the engine look and work. I installed my new water pump, I deleted the coolant tubes for the heater core and installed the delete I made for it. Now I'm waiting on the fuel lines to come in so I can finish that. I had to take the lower intake off because I think I was having a coolant leak from that so I bought new gaskets for it and decided to clean it up while it's out. Once this is all bolted back up I'm praying there wont be any leaks... that would be deflating. But I'm thinking in a few more weeks everything should be back together, fingers crossed. The biggest issue I've encountered so far is not having the proper hardware to secure everything. I'm still in need of a few random bolts (alternator bracket, 1 lower intake bolt, 1 upper intake bolt)

James V · Jan 11, 2020

How she most recently looked. Just have welds in the rear now. Still need a paint job

Rdub6 · Jan 11, 2020

James V said:
Beautiful day in CT today, a good day to continue the progress I've been making. This is the furthest I've ever been inside of an engine before, so it pretty interesting seeing how things inside the engine look and work. I installed my new water pump, I deleted the coolant tubes for the heater core and installed the delete I made for it. Now I'm waiting on the fuel lines to come in so I can finish that. I had to take the lower intake off because I think I was having a coolant leak from that so I bought new gaskets for it and decided to clean it up while it's out. Once this is all bolted back up I'm praying there wont be any leaks... that would be deflating. But I'm thinking in a few more weeks everything should be back together, fingers crossed. The biggest issue I've encountered so far is not having the proper hardware to secure everything. I'm still in need of a few random bolts (alternator bracket, 1 lower intake bolt, 1 upper intake bolt)

Progress is always good!! A nice 60 degrees on Long Island today. Too bad I was working and the car has no interior!
Car looking good man. That hood looks mean, but I’m not sure I could handle the lack of visibility. Would drive me nuts.

James V · Jan 12, 2020

Rdub6 said:
Progress is always good!! A nice 60 degrees on Long Island today. Too bad I was working and the car has no interior!
Car looking good man. That hood looks mean, but I’m not sure I could handle the lack of visibility. Would drive me nuts.

Thanks! The hood definitely took some getting used to. I might have to buy a smaller one and rotate between the 2 depending on where I'm driving

James V · Jan 12, 2020

Found my front wheels I'm going to run instead of skinnies (was still a little iffy on running skinnies on CT roads) picked up some turbines! I think they compliment the weld draglites in the rear pretty well.

James V · Jan 16, 2020

Now that I have wheels and hoping the car will be running again in a couple months, I'm dreaming about a paint job.. need something cheap though. I never realized how expensive this stuff gets

Progress Thread '93 Kenne Bell Notch

James V

James V

James V

General karthief

wonder how much it would cost to ship you a pair

James V

General karthief

wonder how much it would cost to ship you a pair

Steel1

Mustang Master

kendawg73

Well-Known Member

Russell Mustang -6 AN Stainless Steel Fuel Line Kit (86-93) 651104

Steel1

Mustang Master

Russell Mustang -6 AN Stainless Steel Fuel Line Kit (86-93) 651104

James V

Russell Mustang -6 AN Stainless Steel Fuel Line Kit (86-93) 651104

kendawg73

Well-Known Member

James V

James V

Rdub6

So while I wait to figure out my rear end issues

James V

James V

James V

Similar threads

Progress Thread '93 Kenne Bell Notch

wonder how much it would cost to ship you a pair

wonder how much it would cost to ship you a pair

Mustang Master

Well-Known Member

Mustang Master

Well-Known Member

So while I wait to figure out my rear end issues

Similar threads

Privacy & Transparency

Privacy & Transparency