• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

95 gt no rear sway bar ?

  • Thread starter Thread starter Killa
  • Start date Start date Mar 29, 2012

Killa

Active Member
Jul 9, 2007
1,006
56
49
Mar 29, 2012
#1
  • Mar 29, 2012
  • #1
change gear oil last night, and I dint note it have a rear sway bar. and I dont see any bracket missing either, is some 95 gt dont come with rear sway bar ?
 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"
15 Year Member
Nov 29, 1999
14,679
424
154
Boca Raton, Florida
Mar 29, 2012
#2
  • Mar 29, 2012
  • #2
They all come with rear sway bars. The rear sway bar bolts to the lower control arms on both sides, should be two empty holes on yours then.
 

Killa

Active Member
Jul 9, 2007
1,006
56
49
Mar 29, 2012
#3
  • Mar 29, 2012
  • #3
I check it out when I get home. Its safe to drive without rear sway bar til I can find a replacement ?
 

Chythar

Recently finished repairing my rear
20+ Year Stangneter
Aug 26, 2004
2,373
140
113
Foothill Ranch, CA
Mar 29, 2012
#4
  • Mar 29, 2012
  • #4
It's safe to drive without a sway bar, but your cornering performance will suffer. Since you don't seem to have one at all (rather than a broken one), you may just not have noticed it and thought that's how all Mustangs handle around corners.
 

Killa

Active Member
Jul 9, 2007
1,006
56
49
Mar 29, 2012
#5
  • Mar 29, 2012
  • #5
where I can buy a rear sway bar with all the hardware to connect to it ?
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Mar 29, 2012
#6
  • Mar 29, 2012
  • #6
Your going to be hard pressed to find a stock replacement. I'll be getting rid of mine when I put on an anti roll bar but thats a ways off. I'm not sure if ford sells a stock replacement, most places sell just upgraded aftermarket sway bars. If your dead set on getting a stock one go to a pick and pay junk yard and pull one off any 94-98 Mustang
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,301
1,643
214
Acworth, GA
Mar 30, 2012
#7
  • Mar 30, 2012
  • #7
Steeda sells a factory replacement type bar. They made it because the factory ones have a tendancy to break where they bolt to the control arms if you manhandle them at the track. Supposedly their design is improved where it bolts to the control arms.

Kurt
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Apr 1, 2012
#8
  • Apr 1, 2012
  • #8
damn, its $200 through steeda. They consider it an upgrade over the factory swaybar but Id check out junk yards first. Even if you had to pull it off yourself its 4 bolts with a standard size socket.
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,301
1,643
214
Acworth, GA
Apr 1, 2012
#9
  • Apr 1, 2012
  • #9
Call Mustang Parts Specialties for a stock one. They will definately have one. It's just too damn hard to find a Mustang in a junk yard these days.

Kurt
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Apr 1, 2012
#10
  • Apr 1, 2012
  • #10
I was looking awhile ago and it is not that easy. But spending $200 is not to easy on the wallet either lol especially when you only need a factory replacement. Id still try some ford dealerships as well
 

Killa

Active Member
Jul 9, 2007
1,006
56
49
Apr 1, 2012
#11
  • Apr 1, 2012
  • #11
im also look for engine sway bar too , the ing last owner take off those stuff and never put backin,wtf.
 

toyman

10 Year Member
Jul 19, 2007
1,944
54
79
Vernon BC
Apr 1, 2012
#12
  • Apr 1, 2012
  • #12
KillaGT said:
im also look for engine sway bar too , the ****ing last owner take off those stuff and never put backin,wtf.
Click to expand...

Are you thinking the strut tower brace? The STB isn't so important on the 94-95's as it was on the earlier year Fox bodies. Mine has been removed for clearance with the snout on the KB.
 

Killa

Active Member
Jul 9, 2007
1,006
56
49
Apr 1, 2012
#13
  • Apr 1, 2012
  • #13
toyman said:
Are you thinking the strut tower brace? The STB isn't so important on the 94-95's as it was on the earlier year Fox bodies. Mine has been removed for clearance with the snout on the KB.
Click to expand...

nice, thank !!
 

Dino Dino Bambino

15 Year Member
Jun 13, 2007
1,672
89
79
Cyprus
Apr 3, 2012
#14
  • Apr 3, 2012
  • #14
VibrantRedGT said:
They all come with rear sway bars. The rear sway bar bolts to the lower control arms on both sides, should be two empty holes on yours then.
Click to expand...

Mine didn't come with a rear sway bar and neither did any of the other Japanese-spec '94-'95 GT's that were imported into the UAE. With the suspension upgrades that I've done, there's very little body roll and the car handles beautifully so I don't feel that I'm missing out anyway.
 

Suspect

Active Member
Aug 25, 2004
256
0
26
GA.
Apr 3, 2012
#15
  • Apr 3, 2012
  • #15
i have both stock f/r bars. if any one needs em you can have em. just have to be able to pick them up.
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,301
1,643
214
Acworth, GA
Apr 9, 2012
#16
  • Apr 9, 2012
  • #16
By the way, just in case anyone is interested I came upon a stock sway bar for a 4.6 Mustang. I think it's for a New Edge. I was just going to scrap it unless someone needed it.

Kurt
 

notch351

Member
Jul 30, 2010
110
2
19
Apr 9, 2012
#17
  • Apr 9, 2012
  • #17
try mp in Georgia. they will most definitely have one. mostly a mustang bone yard
 

Killa

Active Member
Jul 9, 2007
1,006
56
49
Apr 13, 2012
#18
  • Apr 13, 2012
  • #18
Bullitt95 said:
Mine didn't come with a rear sway bar and neither did any of the other Japanese-spec '94-'95 GT's that were imported into the UAE. With the suspension upgrades that I've done, there's very little body roll and the car handles beautifully so I don't feel that I'm missing out anyway.
Click to expand...

I total forgot about this thread, so you say my mustang is japan spec ? I will take a pix tomorrow and let u guy see is mine is missing it or it dont come at all.
 
You must log in or register to reply here.

Similar threads

C
SN95 Another Coyote swap list
  • catkiller
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
127
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026
catkiller
C
F
Sway Bar Endlinks
  • Fri Guy
  • Jun 30, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
302
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 30, 2025
Fri Guy
F
Rear sway bar popped off
  • Creomod
  • Jan 15, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
491
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 16, 2025
limp
C
Fox Need help identifying brake setup
  • Cypher02xd
  • Apr 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
144
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2026
Mustang5L5
G
Front Sway bar HELP
  • Grabberblueguy77
  • May 28, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
4
Views
384
2005 - 2014 S-197 Mustang -General/Talk- May 28, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?