96-98 PI swap w/ 99+ alternator bracket question!?

mikeyd111879 · Oct 16, 2011

im sure this is been posted before but havent seen anything on it.
when I do my PI swap on my 96 , directions say to use 99+ alternator bracket , does this mean i need to get a 99+ alternator? i know they bolt from top and my 96 i believe is 1 bolt from the middle. Id hate to buy a 99+ alt. since i just got a sweet 200amp powermaster polished alt for the 96. please tell me the bracket works on both year alternators

wmburns · Oct 16, 2011

mikeyd111879 said:
directions say to use 99+ alternator bracket , does this mean i need to get a 99+ alternator?

The directions say to use the 99+ BRACKET. The holes are in different locations because of the metal crossover on the PI intake.

The alternators are the same.

apats77 · Oct 16, 2011

Im not 100% but I believe you can use a pre 99 bracket and drill new holes to make it work. Also the 98 bracket works.

1987stangman · Oct 16, 2011

apats77 said:
Im not 100% but I believe you can use a pre 99 bracket and drill new holes to make it work. Also the 98 bracket works.

I reused my 96' bracket, but you can only drill one hole on the left if I remember. I would have to pop the hood. I have been looking for the correct one ever since I did my full PI motor swap. I ran it with just the one bolt in the alt for a long time.

Not sure on this but unless your converting to COPS the post 99' bracket wont have the provisions to hang your plug wires.

Rife96GTconv · Oct 19, 2011

mikeyd111879 said:
im sure this is been posted before but havent seen anything on it.
when I do my PI swap on my 96 , directions say to use 99+ alternator bracket , does this mean i need to get a 99+ alternator? i know they bolt from top and my 96 i believe is 1 bolt from the middle. Id hate to buy a 99+ alt. since i just got a sweet 200amp powermaster polished alt for the 96. please tell me the bracket works on both year alternators

I just completed my PI swap last month on my 96 GT convertible. I used the 99+ bracket and the 96 alternator that was on the car already. It worked just fine. Good luck with the swap. Just take your time with it and make sure you time the car right and be patient when doing it. You will be VERY pleased with the additional power.

96 GT convertible, PI Swap, VRS X-pipe, Magnaflow cat-back, CAI, 70 mm tb, H&R SS springs, MM cc plates, Tokico Blues, steeda bumpsteer kit, steeda X2 balljoints, 3.73 gear, steeda triax, fidanza aluminum flywheel, king cobra clutch, 17x9 & 17x10.5 chrome bullitts.

Night Shifter · Oct 19, 2011

Isn't it the 01-04 bracket? When I upgraded my 00gt's plastic intake to the one with the aluminum crossover my stock bracket didn't work

sneaky98gt · Oct 20, 2011

Night Shifter said:
Isn't it the 01-04 bracket? When I upgraded my 00gt's plastic intake to the one with the aluminum crossover my stock bracket didn't work

+1. My granddad's early '01 GT had to have the bracket drilled when I replaced the intake to the newer style aluminum crossover one.

Rife96GTconv · Oct 22, 2011

Night Shifter said:
Isn't it the 01-04 bracket? When I upgraded my 00gt's plastic intake to the one with the aluminum crossover my stock bracket didn't work

+1. Sorry I meant to put in there it was an 01-04 bracket.

AZmustang98 · Oct 27, 2011

Not to hijack the thread for myself, but would you guys say that 1,200 dollars for a full swap kit to do the whole thing would be a good deal? I found a kit online that advertised to have EVERYTHING to swap it over.

mikeyd111879 · Oct 31, 2011

depending on what you wanted , $1200.00 is a great price. I think im taking it to the next level and going with trickflow. their full kit + timing chain , gaskets , etc... 3,099.00

96-98 PI swap w/ 99+ alternator bracket question!?

mikeyd111879

New Member

wmburns

apats77

Member

1987stangman

Member

Rife96GTconv

Member

Night Shifter

Well-Known Member

sneaky98gt

Rife96GTconv

Member

AZmustang98

Member

mikeyd111879

New Member

Similar threads

96-98 PI swap w/ 99+ alternator bracket question!?

New Member

Member

Member

Member

Well-Known Member

Member

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency