96 GT possible problem areas?

#21
IMOA if you get the stang, don't go with the PI swap. If I could do it all over again, I'd port the **** out out the non PI heads maybe use the PI manifold and supercharge the biotch. I spent nearly 2G's doing the PI swap, read my mod list. I just didn't get the power I had expected. don't me wrong, the car is much faster, but supercharging it probably would've given me more power. And if would sound f'n tight too.
 
#23
I have a 98 GT, I have 4.10s which makes things equal with a 99+ until you get to about 70 MPH. With 4.10s and a intake swap you will do OK, won't have the fastest Stang in the world though.

Consider a 1998 Z-28, you will run 12s stock and have a T-top as well.
 
#24
HankyGT said:
So its only going 14.5 @ 95 with cams and the PI intake with a full exhaust and stuff?? I went 14.2 with a boost controller and a crappy 2.5" pressbent on my laser.

Maybe I will get the 5.0 :/
Click to expand...
Oh...don't pay attention to that...That's what I can prove with a slip. That was in 90 degree July heat with street tires. I'm trapping 100 now but haven't had a good run to post yet. Should be low to flat 14's...maybe high 13's if I drive right. Looking for some sticky tires for the next time...if my car is fixed after being rear ended.

Not full exhaust...just a Prochamber and stock headers and catback.

The 5.0 isnt much better stock for stock than the 4.6 BUT you can mod it cheaper.
 
#26
I will be picking the car up this weekend or monday i think. I have been constantly reading and searching on these forums to really get a good understanding of the 4.6 and why i should buy it or wait for a 5.0 to show up.

I have decided that althought the 4.6 is a little more $ for ****, to do a 5.0 correctly, its about the same. Having fun with the dipstick seems to be something im sure ill be cursing about when im at it, but you'll only have to go through the bull**** once. Plus, it'll be ok if its a dog for a bit, cause it'll sound good and look nice.

My immediate plans for the car are LT's, h pipe and the catback; i swear its got a catback on it already tho as it sounds great, some 4:10s, and a CIA and tb plenum elbow.

From there I will toss the PI intake and cams on it using the tool, a larger TB and a pump, and just supercharge it. But it wont get crazy till im hooked up with another high paying job. I still have student loans to pay off and will need to make payments on a place to live, so this car will provide a really fun daily that wont give me the DSM headaches.

Thanks for the info guys, and I'll keep you posted!
 
#28
The power steering pump acts like the Vacuum booster on older Cars.. Its referred to as a "Hydro-boost" system, where it uses the pressurized power steering system to "Boost" the power brakes. Its completely normal for the brakes to not work when the belt is removed.

These cars respond great to mods, but with some mods they require a tune. The PI cams and intake swap seem to be putting down some good #'s.

That is a CLEAN car and a good looking price. I would jump on it, but i liked the $4900 price tag on the car i have now (and it already had the mods done to it )
 
#29
YES!!!! My 96 gt is mostly stock but in my opinion it looks better than the 99's and when i get some extra $$$$ i will add some bolt on mods and enjoy the Power and looks!
 
#31
coramprat said:
I have a bud that is going to dyno tune his 97 today...headswap, forged internals, cams (VT stage 3 I think) and a Vortech SQ. He is supposed to call me when he gets his numbers. I'm sure he will post them up here too.
Click to expand...
Damn, yea, let us know. That's going to be a pretty sick stang. Oh and he did he drop his compression for that vortech after the headswap? Dish pistons?
 
#32
Skidzz said:
Damn, yea, let us know. That's going to be a pretty sick stang. Oh and he did he drop his compression for that vortech after the headswap? Dish pistons?
Click to expand...
Not sure...I'd imagine he did but I'll have to ask...oh...

421HP/410TQ...lost fuel pressure at 6100 while it was still pulling. He has to get an inline pump to assist the 255lph pump he has now.

Who says 4.6's are slow...
 
#34
coramprat said:
Not sure...I'd imagine he did but I'll have to ask...oh...

421HP/410TQ...lost fuel pressure at 6100 while it was still pulling. He has to get an inline pump to assist the 255lph pump he has now.

Who says 4.6's are slow...
Click to expand...


How big are his injectors?
 
#35
Eh, I've decided to pass on the 96. I have spent the last week trying to convince myself that the 4.6 is cool and not all that bad to work on. Yet I know that if it was a 94-95 I'd have already had it in my driveway. I really dont feel like pissing around with overhead cam crap, plastic intakes, and cruddy gains despite headswaps and all this other crap.

If anyone has a lower milage (sub or around 100k) 94-95 5 spd with a non leather, non tan interior, let me know

If anyone wants the # for this guys 4.6, I'll be more than happy to share.
 
#36


the 4.6 cars use a hydro boost power brake system like a deisel truck.. so with the serp belt off you had no power brakes.. so now you know what it's like too drive a gt without power brakes
 
You must log in or register to reply here.

Similar threads

Progress Thread H/C Swap Problems/Ideas
Replies
3
Views
689
Fox 5.0 Mustang Tech
AeroCoupe
D
Electrical Manual 2003 GT 4.6L coupe that will not start. Thoughts? Resources?
Replies
3
Views
824
SN95 4.6L Mustang Tech
PSKSAM2
P
Engine 302 production block selection
Replies
40
Views
3K
Fox 5.0 Mustang Tech
limp
Fox Build ideas for the 'Hudson Heap' (87 GT)
Replies
20
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
MadSquirrelTech
C
Progress Thread 2004 Comp Orange GT
Replies
9
Views
2K
1996 - 2004 SN95 Mustang -General/Talk-
ctandc
C
Menu
Log in
Register