A 67 fast back conversion for Mrs. bbettto !

horse sence · Jan 31, 2024

Yep ,you heard that right ,this young lady wants a 67 fast back so we are going to build her one !
She found a nice looking 68 coupe ,delivered it along with all the conversion parts .
It is supposed to storm here for just about the next 8 days so it may be a week before i get started .
The floors look good although i did find one hole on the passenger side rear that looks easy enough . I will know for sure after i blast the floor .

Noobz347 · Feb 1, 2024

Sweet!

On the road again...

AeroCoupe · Feb 2, 2024

Subscribing. The conversion on that 65 was really cool and to see how the conversion is actually done was really cool.

Noobz347 · Feb 2, 2024

Yep.

It's like when one of your favorite Youtubers posts a new episode.

"Oh, sweet!"

Noobz347 · Feb 2, 2024

Speaking of which...

Horse Sense... Consider hiring a kid with half a brain, a digital camera, and some basic video editing skills, to follow you around and record what you do. Let em watch you cuss, bang, grind, weld bend and shape.

If you're half the crusty fuk I think you are, you'll have a million followers in 2 years.

horse sence · Feb 2, 2024

I am only crusty when the blood dries ,besides Bad Chad would not like it if i stole his fan base !

horse sence · Feb 9, 2024

I went out a bought a new spot welder tonight ,this one is supposed to be able to handle up to 3/16 . I will get it put together tomorrow and put a end on the cord and try it out . It can only be used in a few places but the places i do need to use it will save a lot of time and grinding . I have seen the reviews and they seem to be good .
Been storming here so i haven't had a chance to start cutting but it is supposed to clear up this weekend so i may get to start cutting off panels .

horse sence · Feb 10, 2024

I put a new end on the cord. It needed adjusting so i got out the Alan wrenches ,there is 4 screws that have to be loosened ,3 loosened no problem ,the forth someone had tightened so tight i like to never got it loose ! Finally adjusted and tried it out ,this first one is 20 gauge ,close to Dynacorn sheet metal and it welded no problem at all
The next metal measured out to 19 gauge and it also welded with no problem
The only problem i see is the tips like to stick to the metal ,i may try some mig welder cone spray and see what that does . It is also heavy so i may try to rig a shoulder strap to help hold it up . This one is a huge improvement over Harbor Freights old spot welder and i cant wait to put it to use!

horse sence · Feb 12, 2024

I decided to build the two door frames today ,there is 4 pieces that need to be welded together . I welded them with the mig by plug welding ,i want to save the spot welder for the roof and around the trunk and the quarters.

Passenger side is welded ,ground and ready ,going to start on driver side next

horse sence · Feb 12, 2024

Driver side is done ,i said it before and i will say it again ,if you align the notches in the metal as best as you can these pieces just fall together !
We have rain coming again so i cant start cutting the body apart until its over ,so i hope next week to have it at least cut apart .

GOvert · Feb 13, 2024

In response to post #8, last picture, I have wondered about using a rosin based flux to dip the panel spotter tips in. I just started serching and came up with this. When we were using our old PanelSpotter, we always had the tips sticking. I'm currently trying to find new tips for it. So far, no luck. This would be the big green welder that I posted a pic of on another thread of yours.
I bet your new 220-240 spotter works better than any 110-120 unit!
Essmetuin Rosin Paste Flux

horse sence · Feb 13, 2024

Not sure what your tips are like ,the ones on this spot welder screw in ,but if they are not tight they will burn the threads out and the tips will fall out . You may need a machine shop to make you a few sets . This new one actually came with a spare set and thats is good because they really dont last all that long

horse sence · Feb 13, 2024

I was going to order a stick of copper bar to make my own tongs until i saw the price ,i could buy 3 spot welders for a 3 foot stick of 1/2 copper bar

horse sence · Feb 13, 2024

horse sence said:
I decided to build the two door frames today ,there is 4 pieces that need to be welded together . I welded them with the mig by plug welding ,i want to save the spot welder for the roof and around the trunk and the quarters.
Passenger side is welded ,ground and ready ,going to start on driver side next

You know all those holes i drilled yesterday ,i felt pretty stupid when i suddenly remembered i bought a new hole puncher ,the passenger side only took a fraction of the time that the driver side did drilling the holes !

horse sence · Feb 19, 2024

It has been storming here on an off ,supposed to really blast for the next few days then we will send the rain off to you ,you can thank me later !
Got the gas tank out , trunk lid ,rear bumper ,lower valance and end caps off . First half way clear day i will start cutting it apart ,i have a nice pond forming behind the shop right now !

horse sence · Feb 22, 2024

A nice sunny and warm day today so i got out the plasma cutter and started in . I got the quarters and the roof off ,just needs to be trimmed out .

Thats my new 1935 Ford pick up in the back ground ,have to make up for the one i lost . That will be this summers project!

horse sence · Feb 25, 2024

I found our first problem ! Passenger windshield post is toast ,but only the outside ,but it goes down into the top hinge part. I am hoping i can trim away just the top and replace that without having to disturb anything else . Driver side is perfect! I will have to remove the passenger side door to fix the rot

Noobz347 · Feb 25, 2024

Doesn't phase me in the least.

dennis112 · Feb 26, 2024

That's nasty, to say the least . . . .

horse sence · Feb 26, 2024

I think it had a rat nest on top of it ,the other side is clean

A 67 fast back conversion for Mrs. bbettto !

horse sence

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

AeroCoupe

lube between the nut and the face. I know my lubes

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

horse sence

horse sence

horse sence

horse sence

horse sence

GOvert

horse sence

horse sence

horse sence

horse sence

horse sence

horse sence

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

dennis112

horse sence

Similar threads

A 67 fast back conversion for Mrs. bbettto !

Stangnet Facilities Maint Tech... Er... Janitor

lube between the nut and the face. I know my lubes

Stangnet Facilities Maint Tech... Er... Janitor

Stangnet Facilities Maint Tech... Er... Janitor

Stangnet Facilities Maint Tech... Er... Janitor

Similar threads

Privacy & Transparency

Privacy & Transparency