• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

A arms question..

  • Thread starter Thread starter RsStanG1987
  • Start date Start date Jul 28, 2007

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Jul 28, 2007
#1
  • Jul 28, 2007
  • #1
Are all arms the same from 79-93? And can i use a sn95 a-arm on a fox?
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Jul 28, 2007
#2
  • Jul 28, 2007
  • #2
ttt
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jul 28, 2007
#3
  • Jul 28, 2007
  • #3
They say all FOX Stangs and Capris are the same (Fox 79-93) however I have heard that 90-93 are different because of some extra guard welded on due to the switch over to 16" wheels, its kinda like the Fender opening is bigger on 90-93 Stangs for the same reason. I think SN 95s stangs are longer so it would widen your track and I also think they are not compatable with FOX spindles. COuld be wrong but that is what i heard.
 
T

TokyoJoe

New Member
Mar 25, 2007
179
5
0
Jul 28, 2007
#4
  • Jul 28, 2007
  • #4
[mini jack] so if you have sn95 spindles fox arms would not work?
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Jul 28, 2007
#5
  • Jul 28, 2007
  • #5
I have sn-95 spindes on my car now..
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jul 28, 2007
#6
  • Jul 28, 2007
  • #6
spindles work just not sure how fox spindles would work with SN95 a-arms. it may push them out too far where sn95 spindles are set up for the wider track of the SN95 car.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Jul 28, 2007
#7
  • Jul 28, 2007
  • #7
The SN95 A Arms are too long and the Ball joint is wrong for Fox Spindles.
 
T

TokyoJoe

New Member
Mar 25, 2007
179
5
0
Jul 29, 2007
#8
  • Jul 29, 2007
  • #8
OK, but will the fox a-arms work with the sn95 spindles on a fox?
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jul 29, 2007
#9
  • Jul 29, 2007
  • #9
TokyoJoe said:
OK, but will the fox a-arms work with the sn95 spindles on a fox?
Click to expand...

yes they will. I have a set of 96 spindles I will be installing on m 82 Capri. Some say that 96 and up spindles will push your front track too much for standard backspacing on Mustang wheels others say it wont. Some say 94-95 spindles, I guess its up to you I do know that if you go with PBR calpiers you will need to grind on the 94-95 spindles and with 96 and up its a direct fit.

Have fun.
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Jul 29, 2007
#10
  • Jul 29, 2007
  • #10
Shakerhood said:
The SN95 A Arms are too long and the Ball joint is wrong for Fox Spindles.
Click to expand...

The ball joints will work..
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Jul 29, 2007
#11
  • Jul 29, 2007
  • #11
TokyoJoe said:
OK, but will the fox a-arms work with the sn95 spindles on a fox?
Click to expand...


Yes, you will either need to press in Sn95 ball joints or fab up a .330" spacer or use washers to take up the space if you use the fox balljoints
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Jul 30, 2007
#12
  • Jul 30, 2007
  • #12
RsStanG1987 said:
The ball joints will work..
Click to expand...


In Post #3 it says would Fox Spindles work on SN95 A Arms, I dont think you would ever get the Castle Nut on. Not sure why anyone would want SN95 Arms and then use Fox Spindles on them either.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Jul 30, 2007
#13
  • Jul 30, 2007
  • #13
93 LX said:
yes they will. I have a set of 96 spindles I will be installing on m 82 Capri. Some say that 96 and up spindles will push your front track too much for standard backspacing on Mustang wheels others say it wont. Some say 94-95 spindles, I guess its up to you I do know that if you go with PBR calpiers you will need to grind on the 94-95 spindles and with 96 and up its a direct fit.

Have fun.
Click to expand...


94-95 Spindles are about 5mm Wider per side than Stock and the 96-04s are about 8mm Wider than the 94-95s. Cobra, Mach1, and Bullitt Calipers bolt right up with no grinding.
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Jul 30, 2007
#14
  • Jul 30, 2007
  • #14
Shakerhood said:
In Post #3 it says would Fox Spindles work on SN95 A Arms, I dont think you would ever get the Castle Nut on. Not sure why anyone would want SN95 Arms and then use Fox Spindles on them either.
Click to expand...

The fox ball joint is longer and you need to use a spacer with it..
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Jul 31, 2007
#15
  • Jul 31, 2007
  • #15
RsStanG1987 said:
The fox ball joint is longer and you need to use a spacer with it..
Click to expand...


I am 100% Aware of this as I have SN95 Brakes on my Car and I used the Spacer. Again, go back and look at Post #3 and #6 as it asks about using SN95 A Arms with Fox Spindles, in that Oddball combination the SN95 Ball Joints would be too short to mate up with Fox Spindles!!!
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Aug 2, 2007
#16
  • Aug 2, 2007
  • #16
The Ford Racing M-3075-A A Arms are a great Bargin as they have new bushings and upgraded Balljoints.
 

1red95gt

New Member
Dec 22, 2006
31
0
0
Three Rivers, Mi
Aug 2, 2007
#17
  • Aug 2, 2007
  • #17
+1
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 11, 2007
#18
  • Aug 11, 2007
  • #18
Shakerhood said:
The Ford Racing M-3075-A A Arms are a great Bargin as they have new bushings and upgraded Balljoints.
Click to expand...

Anyone know a good place to get these a-arms?

Allen
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Aug 11, 2007
#19
  • Aug 11, 2007
  • #19
93 LX said:
Anyone know a good place to get these a-arms?

Allen
Click to expand...

You can find them just about anywhere, for example give Summit a call.
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
517
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
O
Back in a Fox
  • Osorio299
  • Jul 24, 2026
  • The Welcome Wagon
Replies
2
Views
149
The Welcome Wagon Jul 25, 2026
gkomo
C
93 Tubular A Arm Bushings
  • Chrispy62
  • Jul 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
142
1996 - 2004 SN95 Mustang -General/Talk- Jul 31, 2026
Chrispy62
C
W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
297
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
3K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?