• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

A/C condensation drips on exhaust.. Would that casue it to crack over time?

  • Thread starter Thread starter The Green GT
  • Start date Start date Sep 7, 2006

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Sep 7, 2006
#1
  • Sep 7, 2006
  • #1
I got my turn downs, and it had an exhaust leak. It was there before, just not as bad. I told the muffler shop to look at it while I was at work, they said that the A/C drips on it, which I know. But would this cause it to crack over time?


Second question.

X-pipe or H-pipe?
What are the differences besides the obvious shapes?
Where are the best ones? And what do you think about running a new H-pipe with no cats of mufflers? Obnoxiously loud, so I know I would love the sound, but power wise? I know I would lose power, but how much compared to the stock exhaust minus the muffs?
 

94Blue302GT

Member
Oct 20, 2003
704
3
19
Chicago
Sep 7, 2006
#2
  • Sep 7, 2006
  • #2
crack? i doubt it.
I believe in the theory behind the H pipe in that it sucks the gasses out, whereas the X pipe evens the flow, but doesn't suck the gasses out. However, a lot of people prefer the X pipe sound, and also say that the X will make more power. I think the H pipe is for NA and the X is for Forced.
 

Black95GTS

Active Member
Jan 8, 2004
1,644
3
38
Marlborough, MA
Sep 7, 2006
#3
  • Sep 7, 2006
  • #3
94Blue302GT said:
crack? i doubt it.
I believe in the theory behind the H pipe in that it sucks the gasses out, whereas the X pipe evens the flow, but doesn't suck the gasses out. However, a lot of people prefer the X pipe sound, and also say that the X will make more power. I think the H pipe is for NA and the X is for Forced.
Click to expand...



Read this. Its pretty dense but will answer any exhaust question you have:

http://www.popularhotrodding.com/enginemasters/articles/hardcore/0505em_exh/index1.html

X pipe.

Adam
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 7, 2006
#4
  • Sep 7, 2006
  • #4
I wouldn't sweat the AC drip. Otherwise, people that live in Seattle would constantly have cracked exhausts.
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Sep 7, 2006
#5
  • Sep 7, 2006
  • #5
But in one specific place, over and over. even the exhaust pipe will give to the chinese torture method

Maybe it might cause excessive oxidation in that area, but I doubt it would actually cause a problem.
Scott
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Sep 7, 2006
#6
  • Sep 7, 2006
  • #6
My ac drips right on the collector of my lt's. Makes quite the racket when I kill it and walk away in the summer

I asked the very same Q as yours several years ago and everybody then said don't worry about it.

So far so good

however

My 95 is not a dd

Grady
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Sep 8, 2006
#7
  • Sep 8, 2006
  • #7
final5-0 said:
My 95 is not a dd

Grady
Click to expand...
Mine is. I hear that noise all the time though. I knew what it was. But what it all boils down to is that my exhaust IS cracked and I need a new x or h-pipe.
I guess Ill order it next paycheck.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 8, 2006
#8
  • Sep 8, 2006
  • #8
I dont know a lot about metallurgy but that is a little unusual AFAIK (water hitting a hot pipe is not a big deal in the world of metal). Is it weldable?

Like what some of the guys were getting at, you could make a little discharge tray to carry the water away from the pipe. That OEM discharge tube is there by-design for just the purpose it performs however. If Ford foresaw an issue (and every other car maker out there - most are oriented in a similar fashion), you'd think they'd have run a remote discharge tube.

I am sorry to hear about the issue though. Good luck Eric.
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Sep 8, 2006
#9
  • Sep 8, 2006
  • #9
noticed this when i fixed my a/c a couple months ago...
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Sep 8, 2006
#10
  • Sep 8, 2006
  • #10
The shop said it could be welded but they would have to take the H-pipe out to get to it. So I think Ill just get a new h-pipe.
 
I

igotyofire

Member
Feb 26, 2004
774
1
19
Southern California
Sep 8, 2006
#11
  • Sep 8, 2006
  • #11
Just got my X pipe and i love it, i highly recommend, and felt a nice lil hp increase on my cobra, the power doesn't hit a brick wall at 4500-5k rpms like it used too, but thats probably because of my gt40heads/intake. those with e7 heads,and stock intake may not feel as good of gains is my belief. Cant speak on behalf of no mufflers, from what i hear people say it doesn't sound to great. Id probably atleast run a bullit style or magnapack style race muffler
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Sep 8, 2006
#12
  • Sep 8, 2006
  • #12
igotyofire said:
Just got my X pipe and i love it, i highly recommend, and felt a nice lil hp increase on my cobra, the power doesn't hit a brick wall at 4500-5k rpms like it used too, but thats probably because of my gt40heads/intake. those with e7 heads,and stock intake may not feel as good of gains is my belief. Cant speak on behalf of no mufflers, from what i hear people say it doesn't sound to great. Id probably atleast run a bullit style or magnapack style race muffler
Click to expand...
When you say race muffler, isnt that a fart can type deal? If it is then no fing way.
 
I

igotyofire

Member
Feb 26, 2004
774
1
19
Southern California
Sep 8, 2006
#13
  • Sep 8, 2006
  • #13
The Green GT said:
When you say race muffler, isnt that a fart can type deal? If it is then no fing way.
Click to expand...

these are the ultraflows on summits site, magnapacks are also similiar design, i believe the SLP loudmouth uses this type of muffler design as well. I believe these muffle the sound minimally while allowing flow. summit has those listed 35 bux a piece. im just suggesting as imo straight pipes will sound loud and obnoxious like the fart can u seem to be describing. from the clips ive seen of 5.0s with straight pipes i havent been to impressed, to each is own tho
found a vid
http://mechanic-mike.textamerica.com/?r=5104988

 

Attachments

  • wlk-24215.webp
    4 KB · Views: 182

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Sep 9, 2006
#14
  • Sep 9, 2006
  • #14
igotyofire said:
these are the ultraflows on summits site, magnapacks are also similiar design, i believe the SLP loudmouth uses this type of muffler design as well. I believe these muffle the sound minimally while allowing flow. summit has those listed 35 bux a piece. im just suggesting as imo straight pipes will sound loud and obnoxious like the fart can u seem to be describing. from the clips ive seen of 5.0s with straight pipes i havent been to impressed, to each is own tho
found a vid
http://mechanic-mike.textamerica.com/?r=5104988

Click to expand...
That sounds nothing like a ricer. I have straight pies right now. I put turndowns on tuesday, and they are louder than my side pipes. I inda like the side pipes more though. They "pop" more. They have more tone I guess you would say. And IMO the little amount of resistance that those mufflers would give just isnt worth $70 to me. I love obnoxiously loud exhaust. I heard a '94 (I think) F-150 with no cats or mufflers and I loved it. It was VERY loud, but thats what I like. But since it wasnt an HO it will sound a little different but not much.
 

Attachments

  • wlk-24215.webp
    4 KB · Views: 199

montegoman351

Member
Jan 12, 2007
169
1
18
Mar 7, 2007
#15
  • Mar 7, 2007
  • #15
Yes, as a matter of fact, it can create a crack. I think 3.8 Mustangs are bad about it, a new manifold, or fixed manifold and a A/C drip deflector is installed. I believe Ford has a SSM or TSB about this. So, in short it is possible for it to crack due to the water, but many cars drip AWAY from the exhaust. Some metals are more suceptable though. But a deflector can be "engineered" by you if it becomes bothersome. Made out of stainless of aluminum.
 

Labora

Founding Member
Jun 11, 2000
1,854
26
69
Dallas, Texas
Mar 8, 2007
#16
  • Mar 8, 2007
  • #16
montegoman351 said:
Yes, as a matter of fact, it can create a crack. I think 3.8 Mustangs are bad about it, a new manifold, or fixed manifold and a A/C drip deflector is installed. I believe Ford has a SSM or TSB about this. So, in short it is possible for it to crack due to the water, but many cars drip AWAY from the exhaust. Some metals are more suceptable though. But a deflector can be "engineered" by you if it becomes bothersome. Made out of stainless of aluminum.
Click to expand...

Exactly what I was going to say, I've seen it crack manifolds on v6's more. (seen it happen to two cars I know of personally)

On my moms v6 the water drops RIGHT into the middle of the collector this is where the ones I've seen crack/break at. If it drops into a flat spot I would be more concerned then a round spot where it will splash off more.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Mar 8, 2007
#17
  • Mar 8, 2007
  • #17
montegoman351 said:
Yes, as a matter of fact, it can create a crack. I think 3.8 Mustangs are bad about it, a new manifold, or fixed manifold and a A/C drip deflector is installed. I believe Ford has a SSM or TSB about this. So, in short it is possible for it to crack due to the water, but many cars drip AWAY from the exhaust. Some metals are more suceptable though. But a deflector can be "engineered" by you if it becomes bothersome. Made out of stainless of aluminum.
Click to expand...

And I bet they solved the problem six months ago when anyone last posted in this thread, too.
 
You must log in or register to reply here.

Similar threads

G
Quiet my 2015 GT on the cheap
  • gsrblack
  • Feb 12, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
6
Views
789
2015 - 2023 (S550) Mustang -General/Talk Apr 16, 2025
gkomo
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Engine Throwing codes 94, 33, 34, 44, and sporadic engine shutoff.
  • Ryu
  • Oct 9, 2024
  • Fox 5.0 Mustang Tech
Replies
11
Views
1K
Fox 5.0 Mustang Tech Oct 16, 2024
89ripper
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?