Accufab mid-length headers install

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Jan 10, 2008

#1

• Jan 10, 2008

• #1

my accufab mid-length headers were installed today. i worked from home today, so i haven't seen it yet. i'll see it tomorrow. i'll have more pics and impressions after that.

salient info from the combo related to the header fitment is: 410 stroker, afr 205 heads, AOD, aje k-member 3/4" drop.

impressions from my mechanic tony:

- the driver's side fits perfectly, almost as if they had the car there when they were making them
- the passenger's side is not perfect ... it does not clear somewhere near where the frame and k-member meet, about 2 or 3" into the collector, and it also apparently very close to the bell housing. i'll get pics of it tomorrow
- tony welded 3-bolt flanges on them for ease of assembly and disassembly
- he also welded in O2 bungs
- for the passenger side clearance issue, after welding the flange on, he put it in a press and squeezed the collector to make room around the spot where it hits. this should not introduce a flow restriction because the total area of the opening is essentially unchanged. the flange on the end kept the end from being disfigured.

before the intall, as they came from accufab:











tony also installed the AOD today:

 

Attachments

• accufabs-1.webp

  25.5 KB · Views: 714
• accufabs-2.webp

  22.7 KB · Views: 755
• accufabs-5.webp

  23.8 KB · Views: 449
• accufabs-4.webp

  25.2 KB · Views: 316
• accufabs-3.webp

  26 KB · Views: 603
• aod-3.webp

  41 KB · Views: 377

D

Danman765432

Member

Mar 3, 2006

471

0

16

Nutley, NJ

Jan 10, 2008

#2

• Jan 10, 2008

• #2

If you dont mind me asking what would make the AOD better than the AODE in our car? Also wont you have to change the computer out to a fox one?

 

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Jan 10, 2008

#3

• Jan 10, 2008

• #3

heh, long story

for most 94/95 guys, it is probably not better

for me though, it makes sense ...

you may be familiar with my tranny problems from the manual to 4R70W conversion that went sour. i haven't driven my stang for 6 months because of it

you may have also heard that i have to sell the stang because i agreed to do that when i bought the fairlane in my sig. well, i do not want to lose the 410, so i decided i would pull the 410 and keep it and sell the stang as a roller. then i had the bright idea to put the 410 into the fairlane. then i would have a killer motor in a sweet car, but i don't want a manual shift tranny in the fairlane, and the c6 only has 3 gears, no overdrive, so i decided to get an aod to round out the combo.

now i can finally drive the stang while the fairlane is getting finished

and after the fairlane is ready, i can pull the 410 and aod and put them into the fairlane and sell the stang as a roller.

so you see ... for me it makes sense. it was cheap too: $600 for the tranny built for 550hp and $189 for the converter.

re the computer: i'll just put my manual computer back in. it had no interaction with the T5 except the back up lights.

 

D

Danman765432

Member

Mar 3, 2006

471

0

16

Nutley, NJ

Jan 10, 2008

#4

• Jan 10, 2008

• #4

Oh ok, Now I get it. Just a temp thing...I have been trying to keep up with what has been going on with your build but I must have overlooked some stuff.

 

1slow95

Founding Member

May 16, 2002

1,797

3

48

ohio

Jan 15, 2008

#5

• Jan 15, 2008

• #5

So does the pass. side header hit on the frame or the k-member? Let me know how they work out once you get the rest of the exhaust on.

Would it be possible to get some pics from underneath the car?

 

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Jan 15, 2008

#6

• Jan 15, 2008

• #6

the pass. side actually hits at 2 places ... the bell housing (just brushes it a little), and one of the mounting points for the k-member (about 1/2")

tony ended up cutting the collector and re-welding it at a 5 degree angle

i'll take pics soon and post them

 

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Jan 25, 2008

#7

• Jan 25, 2008

• #7

some pics of the clearance problem on the passenger side

you can see where it scraped on the k-member attachment side, and where it had to be dimpled to avoid the tranny ...

i don't think either spot is much of a restriction

 

Attachments

• pass-side-clr1.webp

  61.9 KB · Views: 407
• pass-side-clr2.webp

  48.3 KB · Views: 360

MysteryMachine

Active Member

Jun 21, 2003

1,835

2

39

Parkesburg, PA

Jan 26, 2008

#8

• Jan 26, 2008

• #8

so is it back together yet?

 

1slow95

Founding Member

May 16, 2002

1,797

3

48

ohio

Jan 29, 2008

#9

• Jan 29, 2008

• #9

Wow, that is a tight fit! I've got a blowproof bellhousing so I think I have even less room in that area.

What motor mounts are you using?

 

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Jan 29, 2008

#10

• Jan 29, 2008

• #10

MysteryMachine said:

so is it back together yet?

Click to expand...

now that i have the kickdown cable hooked up, i got it over to the midas last friday. then i had to order some cats and flanges and stuff for the guy ... they came today.

fyi, i got some PYPES 3" in/out high-flow cats from Summit ... only $62 each

he says he'll probably be done hooking it all up tomorrow

Low-5.0 said:

Wow, that is a tight fit! I've got a blowproof bellhousing so I think I have even less room in that area.

What motor mounts are you using?

Click to expand...

i have stock mounts, but i have an aje k-member that drops the motor 3/4"

 

Pokageek

Active Member

Jun 10, 2005

2,767

0

46

MA, USA

Jan 30, 2008

#11

• Jan 30, 2008

• #11

How much were those? Nice. Do they give it more power?

 

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Jan 30, 2008

#12

• Jan 30, 2008

• #12

exhaust is done ...

keith, the accufabs cost about $450

the PYPES cats cost $62 each on summit

 

Attachments

• exh-02.webp

  32.9 KB · Views: 309
• exh-01.webp

  30.4 KB · Views: 374
• exh-04.webp

  28.1 KB · Views: 394
• exh-03.webp

  29.1 KB · Views: 357
• exh-05.webp

  25.8 KB · Views: 339

94-302-vert

Active Member

Aug 16, 2004

1,947

2

36

NE CT

Jan 30, 2008

#13

• Jan 30, 2008

• #13

Did you drive it? Impressions?

 

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Jan 30, 2008

#14

• Jan 30, 2008

• #14

i drove it some ... not much yet ... the tranny line pressure (controlled by the kickdown cable) still needs to be adjusted.

i like the sound though

 

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Jan 30, 2008

#15

• Jan 30, 2008

• #15

a pic of the PYPES cats

 

Attachments

• exh-06.webp

  21.3 KB · Views: 360

1slow95

Founding Member

May 16, 2002

1,797

3

48

ohio

Jan 31, 2008

#16

• Jan 31, 2008

• #16

Looks good! So did that quiet it down a good bit? And I'm guessing there's no more exhaust leaks?

 

MysteryMachine

Active Member

Jun 21, 2003

1,835

2

39

Parkesburg, PA

Jan 31, 2008

#17

• Jan 31, 2008

• #17

biggest sub frame connecters I've ever saw

 

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Jan 31, 2008

#18

• Jan 31, 2008

• #18

Low-5.0 said:

Looks good! So did that quiet it down a good bit? And I'm guessing there's no more exhaust leaks?

Click to expand...

yes .... it seems pretty mild now. and ...

no more exhaust leaks, scraping or O2 problems

and the exhaust doesn't smell bad anymore

MysteryMachine said:

biggest sub frame connecters I've ever saw

Click to expand...

lol they were on the car when i bought it

 

MysteryMachine

Active Member

Jun 21, 2003

1,835

2

39

Parkesburg, PA

Jan 31, 2008

#19

• Jan 31, 2008

• #19

oh wow thats what they actually are. I wasnt really sure and said that as a joke thinking maybe it was on some kinda lift. I might need some like that someday.

 

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Jan 31, 2008

#20

• Jan 31, 2008

• #20

oh .. i think i'm with you now ...

i think you might have been referring to the yellow things ... those are part of the lift ...

the rusty things are the subframes, not the yellow things

 

Attachments

• exh-03.webp

  29.1 KB · Views: 340