Accufab Throttle Bodies

Redsnk95

Founding Member

Feb 3, 2002

2,243

1

0

Houston, TX

May 6, 2008

#21

• May 6, 2008

• #21

I run the 90mm race with the blank 3/8" plate which acts as your throttle cable brackets. I believe my 90mm race has a 102mm opening, necks down to 90mm to create the swirl effect. I love the throttle body, very happy so far.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 7, 2008

#22

• May 7, 2008

• #22

Just ordered the 75F from www.JDSperformance.com

For $237 with no S/H. The only place I could find it without the extra $$ of the EGR spacer. I ordered the plate from UPR Products.

I was going to get the other stuff from a junk yard, but for now does anyone know where I can get the IAC piece?
Thanks
RC

 

95strokerPSU

Member

Jul 29, 2004

986

1

19

Sacramento from Philly

May 7, 2008

#23

• May 7, 2008

• #23

I bought a used polished one off of eBay. Do a search for "polished IAC" and you'll get a couple hits

 

Redsnk95

Founding Member

Feb 3, 2002

2,243

1

0

Houston, TX

May 7, 2008

#24

• May 7, 2008

• #24

I picked up a new IAC direct from Ford, along with the TPS sensor and TPS sensor harness and spliced it into my current TPS harness.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 7, 2008

#25

• May 7, 2008

• #25

Redsnk95 said:

I picked up a new IAC direct from Ford, along with the TPS sensor and TPS sensor harness and spliced it into my current TPS harness.

Click to expand...

I got them both at D.A.P today.

Is this the right TPS sensor:



Thanks
RC

 

Redsnk95

Founding Member

Feb 3, 2002

2,243

1

0

Houston, TX

May 7, 2008

#26

• May 7, 2008

• #26

Yep, but you will need the Male pigtail from Ford as well. Luckily now Ford sells all the stuff you need.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 8, 2008

#27

• May 8, 2008

• #27

Redsnk95 said:

Yep, but you will need the Male pigtail from Ford as well. Luckily now Ford sells all the stuff you need.

Click to expand...

1. Do you have a P/N or picture of that piece? I dont know what to ask Ford for specifically when I go there.

2. Do you know if they sell the gasket for the IAC? I may need one if I buy a used IAC and return the new one.

Thanks
RC

 

Black95GTS

Active Member

Jan 8, 2004

1,644

3

38

Marlborough, MA

May 8, 2008

#28

• May 8, 2008

• #28

94GTLaserRC said:

2. Do you know if they sell the gasket for the IAC? I may need one if I buy a used IAC and return the new one.

Thanks
RC

Click to expand...

I couldn't find this gasket when doing this job, so I ended up buying some material from Autozone and cutting my own. It's an extra 20 minutes, plus for the same deal you'll have plenty of extra for any other odds and ends gaskets you'll need.

Adam

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 8, 2008

#29

• May 8, 2008

• #29

is this the right one?

Thanks
RC

 

Redsnk95

Founding Member

Feb 3, 2002

2,243

1

0

Houston, TX

May 9, 2008

#30

• May 9, 2008

• #30

RC. Just tell Ford what you need. About 2 year ago they started selling everything you need. I buy pigtails from them all the time for my car.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 9, 2008

#31

• May 9, 2008

• #31

Redsnk95 said:

RC. Just tell Ford what you need. About 2 year ago they started selling everything you need. I buy pigtails from them all the time for my car.

Click to expand...

I did ask them..they had no clue, just like I thought

Anyway, I ordered the one above from RJMinjectiontech.com for $15...hope that's the right one.

Thanks
RC

 

Redsnk95

Founding Member

Feb 3, 2002

2,243

1

0

Houston, TX

May 9, 2008

#32

• May 9, 2008

• #32

Should be the right one. You'll cut your connect off and splice that new one into your harness. I can't remember which color wire goes to wire new wire. Do a search if you can't find the answer I will take a look at mine.

Suprised the Ford parts didn't help you any. I purchased 3 different pigtails about two years ago to replace some worn out parts. Picked up a new pigtail for the electric fan, the TPS pigtail and AIT pigtail.

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

May 9, 2008

#33

• May 9, 2008

• #33

Black95GTS said:

I couldn't find this gasket when doing this job, so I ended up buying some material from Autozone and cutting my own. It's an extra 20 minutes, plus for the same deal you'll have plenty of extra for any other odds and ends gaskets you'll need.

Adam

Click to expand...

To get the IAC gasket you need to get an intake set for a Fox....MS93334 is the Fel-Pro P/N...You also get the dizzy o-ring...

 

str8stang036

New Member

Dec 28, 2002

1,382

0

0

Miami

May 9, 2008

#34

• May 9, 2008

• #34

we'll make the gasket out of gasket material, don't sweat it.

 

Redsnk95

Founding Member

Feb 3, 2002

2,243

1

0

Houston, TX

May 9, 2008

#35

• May 9, 2008

• #35

RC. I am willing to bet that the throttle body comes with a new IAC gasket.

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

May 9, 2008

#36

• May 9, 2008

• #36

str8stang036 said:

we'll make the gasket out of gasket material, don't sweat it.

Click to expand...

Threw the pic up as I know RC is anal and thought he might want the official item...

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 9, 2008

#37

• May 9, 2008

• #37

RIO5.0 said:

Threw the pic up as I know RC is anal and thought he might want the official item...

Click to expand...

Actually I have one from the IAC I bought, but need to return it since I bought a POLISHED IAC from EBAY. The Ford dealer DOES have that gasket though for $1.62 in case the TB doesnt come with it. Thanks for all the help. This piece will look nice with my new xxxxxxx Im working on!

 

95strokerPSU

Member

Jul 29, 2004

986

1

19

Sacramento from Philly

May 9, 2008

#38

• May 9, 2008

• #38

You're TB will come with an IAC gasket.

 

Pokageek

Active Member

Jun 10, 2005

2,767

0

46

MA, USA

May 10, 2008

#39

• May 10, 2008

• #39

95Vert said:

You're the first person I hear that complains about that.

Click to expand...

Good then buy mine slightly discounted.... non-refundable when it whistles. Agreeable? Anyone?

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 15, 2008

#40

• May 15, 2008

• #40

Finally got mine in yesterday...WHAT A BEAUTIFUL PIECE!!!

The finish looks like chrome...not even polished. I would highly recommend this to anyone that wants a "show" engine bay. The piece is nice, and converting to a Fox Setup will clean the area up a bit. Cant wait to get it on, but with the other stuff Im doing may be a couple of months.

BTW...it DID come with an intake and IAC gasket!
RC