Adjusting Rockers WITHOUT Oil

S

Scorcher2005

Member

Apr 17, 2004

883

0

16

South Carolina

Jul 31, 2005

#1

• Jul 31, 2005

• #1

i am putting the engine back together and am adjusting the rockers. i know the lifters need to prime up w/ oil and then sit for a while or something like that. Well, my engine is completely drained of oil. Can i still use the same procedure to adjust the lifters? Open the exhaust valve, wiggle pushrod and turn bolt until there is no more slack, turn the bolt another 1/2 turn, then tighten the allen machine screw and be all set?

 

Michael Yount

Mustang Master

Apr 10, 2002

9,039

6

79

Charlotte, NC

Jul 31, 2005

#2

• Jul 31, 2005

• #2

For stud mount that should be ok - lifter on the base circle, tighten til you just hit zero lash, then another 1/2 turn and hit it with set screw/lock.

Doesn't matter if the lifters are full of oil or not -- there's a spring inside them that holds the plunger up when no oil is present.

 

maverick0716

Founding Member

Jan 12, 2002

3,924

0

56

Chilliwack, BC, Canada

Jul 31, 2005

#3

• Jul 31, 2005

• #3

When I adjusted mine I just used a pair of my old lifters and put a tack weld so the plunger doesn't go down.

 

S

Scorcher2005

Member

Apr 17, 2004

883

0

16

South Carolina

Jul 31, 2005

#4

• Jul 31, 2005

• #4

ok, well then i have one head done so far. i have to wait til tomorrow to finish. (i didnt realize the Felpro 1006 gaskets came separately, not as a pair :-/)

 

ninety15.0

New Member

Mar 10, 2004

1,336

0

0

Jul 31, 2005

#5

• Jul 31, 2005

• #5

I was also wondering how this was done....how would an engine builder set the lash without having oil in the motor, I am receiving mine empty???

 

S

Scorcher2005

Member

Apr 17, 2004

883

0

16

South Carolina

Jul 31, 2005

#6

• Jul 31, 2005

• #6

ninety, its the same procedure as normal